
Piston – Rexroth A10VD17
Quick answer
The A10VD17 piston is the reciprocating element in the cylinder block of the Rexroth-Uchida A10VD main pump used on mini excavators, converting rotation into the pumping stroke.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies official JIC A10VD17 pistons that drop into the original block and hold clearance, with fast quotes.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Piston
- Brand / pump line
- Uchida/Rexroth · A10V
- Model code
- A10VD17
- Condition
- New, correct code
- Availability
- On request
What the A10VD17 piston is
The A10VD17 piston is the reciprocating element inside the cylinder block of an axial piston pump. Its ball end rides on the shoe and swash plate, turning shaft rotation into the suction and discharge strokes that pressurise the oil. This piston set fits the A10VD main pump (Rexroth-Uchida) used on mini excavators.
Signs of wear and choosing quality
Worn pistons show up as scored surfaces, a loose ball-and-shoe joint, and widening bore clearance that lets oil leak internally — the pump loses pressure, runs slow and hot, knocks, and drops metal particles into the oil. Deep scoring means replacing the full set to keep clearances even. Việt Trung Hải is an authorized JIC Hydraulics distributor, so the A10VD17 pistons you get are official JIC product: cut to the exact code, material and surface hardness, dropping into the original block at the right clearance with no fitting work. Genuine pump-maker parts are on the shelf as well. Contact us for a fast quote.
Frequently asked questions
Which excavator does the A10VD17 piston fit?
The A10VD17 piston set fits the Rexroth-Uchida A10VD main pump found on mini excavators. Send us your pump code or machine model and we will confirm the correct piston set and count before quoting.
Should I replace one piston or the whole set?
Replace the whole set. The pistons share one cylinder block and need even clearances; swapping a single piston risks uneven loading, fast wear and internal leakage. A matched set keeps pressure stable and lasts longer.
Does a JIC piston need machining to fit an original A10VD17 block?
No. JIC pistons are cut to the A10VD17 code and to the same fitting tolerance as the block bore, so they go straight in at the right clearance — just clean the parts and check the ball-and-shoe joint before assembly. Việt Trung Hải, an authorized JIC Hydraulics distributor, confirms the code with you before shipping.
Get a quote
Request a quote: Piston – Rexroth A10VD17
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A10VRotary group kit – Rexroth A10VD17A10VD17On requestView · get a quote
Uchida/Rexroth · A10VShoe plate – Rexroth-Uchida A10VD17A10VD17On requestView · get a quote
Uchida/Rexroth · A10VRetainer plate – Rexroth-Uchida A10VD17A10VD17On requestView · get a quote
Uchida/Rexroth · A10VValve plate – Rexroth A10VD17A10VD17On requestView · get a quote
Uchida/Rexroth · A10VBall guide – Rexroth-Uchida A10VD17A10VD17On requestView · get a quote
Uchida/Rexroth · A10VCylinder block – Rexroth A10VD17A10VD17On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V40A10V40On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V43A10V43On requestView · get a quoteTechnical handbook