
Valve plate – Kayaba MAG170
Quick answer
The Kayaba MAG170 valve plate is the porting plate pressed against the cylinder block that times high- and low-pressure supply to the pistons in the KYB travel motor on mid-size excavators.
Việt Trung Hải stocks MAG170 plates to code, JIC and genuine, ready to fit a standard motor, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Kayaba (KYB) · MAG
- Model code
- MAG170
- Condition
- New, correct code
- Availability
- On request
What the Kayaba MAG170 valve plate does
The valve plate is the porting plate pressed against the cylinder block that times each piston's high- and low-pressure porting. In the Kayaba MAG170 travel motor it decides which pistons take pressure to produce rotation, driving the sprocket and track. MAG170 belongs to the KYB travel-motor family used on mid-size excavators.
Signs it needs replacing
A scored, pitted or grooved sealing face leaks internally. Typical symptoms are weak travel, drifting off a straight line, one track running slower, unusual heat, or slipping on inclines. Pull the motor and inspect the sealing face for scoring and flatness against the block.
Choosing quality parts
Việt Trung Hải, an authorized JIC Hydraulics distributor, keeps MAG170 plates from JIC and from Kayaba. The JIC plate uses wear-resistant material with a lapped, polished face held to the MAG170 interchange tolerance, so it seals in a standard motor under load without bench work. Contact us for a fast quote and the right motor version.
Frequently asked questions
Which machine does the MAG170 valve plate fit?
MAG170 is a Kayaba travel motor used on mid-size excavators. A valve plate to MAG170 spec matches the motor cylinder block and valve group to keep tractive performance. Send us the motor code and machine model so Việt Trung Hải confirms the right part.
How do I know the valve plate is worn?
Weak travel, drifting off a straight line, one track running slower, or a motor that overheats often points to a scored valve plate leaking internally. Pull the motor and inspect the sealing face for scoring and flatness against the cylinder block.
Does a JIC plate need any machining to go into a standard MAG170 motor?
No. The JIC plate is made to the MAG170 code with the face lapped and polished to interchange tolerance, so it seats in the original housing and holds the seal under high pressure. Việt Trung Hải is an authorized JIC Hydraulics distributor and will confirm the right MAG170 version.
Get a quote
Request a quote: Valve plate – Kayaba MAG170
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kayaba (KYB) · MAGTravel motor rotary group – Kayaba MAG170MAG170On requestView · get a quote
Kayaba (KYB) · MAGRetainer plate – Kayaba MAG170MAG170On requestView · get a quote
Kayaba (KYB) · MAGPiston – Kayaba MAG170MAG170On requestView · get a quote
Kayaba (KYB) · MAGBall guide – Kayaba MAG170MAG170On requestView · get a quote
Kayaba (KYB) · MAGCylinder block – Kayaba MAG170MAG170On requestView · get a quote
Kayaba (KYB) · MAGTravel motor rotary group – Kayaba MAG150MAG150On requestView · get a quote
Kayaba (KYB) · MAGSwash plate – Kayaba MAG150MAG150On requestView · get a quote
Kayaba (KYB) · MAGRetainer plate – Kayaba MAG150MAG150On requestView · get a quoteTechnical handbook