
Valve plate – Rexroth A8VO160
Quick answer
The A8VO160 valve plate is the high/low-pressure porting plate inside the Rexroth-Uchida A8VO piston pump, the main pump on roughly 30-tonne excavators. When it wears or scores, the pump loses power.
Việt Trung Hải carries A8VO160 plates in genuine and JIC form, on code for the original pump, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8VO160
- Condition
- New, correct code
- Availability
- On request
What the A8VO160 valve plate fits
The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. The A8VO160 belongs to the Rexroth-Uchida A8VO piston-pump family — the main pump on roughly 30-tonne excavators. It carries the full oil load across the two kidney ports, so the face must stay dead flat and wear-resistant.
Signs it needs replacing
A worn plate shows scoring, grooves or cavitation pitting between the pressure zones. Oil bleeds from high to low pressure, so the pump goes weak: slow cylinders, sluggish lifting under load. Heat discolouration points to overheating from a leaking gap. Inspect the cylinder block face too — the pair wears together.
Choosing quality
A valve plate needs steel hardened to the right level, ground flat and surface-treated to hold the seal at high pressure. Việt Trung Hải carries the A8VO160 plate in genuine and JIC form — we are an authorized JIC Hydraulics distributor, and the JIC plate is on code and on interchange tolerance, so it seals in the original pump. Send your pump code for a fast quote.
Frequently asked questions
Which excavator does the A8VO160 valve plate fit?
The A8VO160 is a Rexroth-Uchida piston pump used as the main pump on roughly 30-tonne excavators. The valve plate matches by pump code; send your pump code or machine model and Việt Trung Hải will confirm the right part and quote.
How do I know the valve plate is worn?
Opening the pump reveals scoring, cavitation pitting or heat discolouration on the face. From the cab you notice a weak pump: slow cylinders and sluggish lifting under load as oil leaks across the pressure gap.
Is the JIC A8VO160 plate on code for a standard pump?
It is. Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC A8VO160 plate is built to the code, hardened, ground flat and held to interchange tolerance, so it seals in the original pump. Genuine plates are available too. Send your pump code for a fast quote.
Get a quote
Request a quote: Valve plate – Rexroth A8VO160
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VORear drive shaft – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOFront drive shaft – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VORotary group – Rexroth A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8VO160A8VO160On requestView · get a quoteTechnical handbook