
Piston ring – Rexroth-Uchida A8VO160
Quick answer
The A8VO160 piston (bi bơm) is the reciprocating piston set inside the cylinder block of the Rexroth (Uchida) A8VO main pump, fitted to roughly 30-tonne excavators.
Việt Trung Hải supplies JIC parts on the correct code that hold clearance against the block, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Piston
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8VO160
- Condition
- New, correct code
- Availability
- On request
What the A8VO160 piston fits
The piston, or bi bơm, is the reciprocating element inside the cylinder block of an axial piston pump. As the shaft turns, the pistons ride the swash plate through slipper shoes, drawing in and forcing out oil to build flow and pressure. This A8VO160 piston set is for the Rexroth (Uchida) A8VO main pump used on roughly 30-tonne excavators. The piston and its block bore mesh with a very fine clearance, so material and machining directly decide pump performance.
Wear signs and choosing quality
Worn or scored pistons show up as weak pump output, slow arm speed under load, fast oil heating, and higher case drain. Once the shoes are loose or the contact faces pit, change the whole set to protect the block. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies official JIC A8VO160 pistons — material and machining on code, holding clearance against the block, so the pump comes back to full output. Fast quote on request.
Frequently asked questions
Which excavator does the A8VO160 piston fit?
The A8VO160 piston set is for the Rexroth (Uchida) A8VO main pump, typically found on roughly 30-tonne excavators. Send us your machine model and pump code and we will match the exact part you need to replace.
Should I replace the whole piston set or just a few?
Replace the full set. Pistons wear unevenly, so changing only a few leaves mismatched clearances, weak output, and risk to the cylinder block. A matched set restores pressure and gives more stable, longer-lasting operation.
What comes in an A8VO160 piston set?
The full set of pistons with their shoes, one per block bore, on the A8VO160 code. If you also need the cylinder block or the valve plate, take them in the same order so the group matches. As an authorized distributor, Việt Trung Hải ships JIC parts and gives technical support during assembly.
Get a quote
Request a quote: Piston ring – Rexroth-Uchida A8VO160
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VORear drive shaft – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOFront drive shaft – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VORotary group – Rexroth A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8VO160A8VO160On requestView · get a quoteTechnical handbook