
Rear drive shaft – Rexroth-Uchida A8VO160
Quick answer
The Rexroth-Uchida A8VO160 rear drive shaft is the output shaft that couples torque to the second group of the A8VO160 tandem piston pump, used on ~30-tonne crawler excavators. As an authorized JIC Hydraulics distributor, Việt Trung Hải stocks genuine and JIC shafts to the correct code, ready to fit the original pump, with fast quotes.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8VO160
- Condition
- New, correct code
- Availability
- On request
Rexroth-Uchida A8VO160 rear drive shaft — what it fits
The rear drive shaft is the output, coupling shaft inside the A8VO160 tandem pump — it carries torque across to the second pump group, unlike the front shaft that takes drive straight from the engine. It transmits torque into the cylinder block to spin the rotary group. A8VO160 is Rexroth's main hydraulic piston pump (built under Uchida license), fitted to crawler excavators in the ~30-tonne class.
When to replace
Worn or chipped splines cause slip and a rattle under throttle; a scored seal journal leaks oil; a bent shaft makes the pump vibrate, run hot and lose pressure. Inspect and replace early to avoid damage spreading to the block and bearings.
Choosing quality parts
Shaft life depends on steel grade, heat treatment and spline machining accuracy. Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks A8VO160 rear shafts genuine and JIC — right code, right front/rear position, splines that engage the original Uchida block directly. Contact us for a fast quote.
Frequently asked questions
How does the A8VO160 rear shaft differ from the front shaft?
The rear shaft sits at the back of the tandem pump and carries torque to the second pump group, while the front shaft takes drive from the engine. They differ in position and often in spline, so order the correct one.
Which excavators use the A8VO160?
The A8VO160 is Rexroth's main hydraulic piston pump (Uchida license), fitted to crawler excavators around the 30-tonne class. The A8VO160 rear drive shaft replaces the worn or spline-damaged shaft in that pump.
Does Việt Trung Hải stock the A8VO160 rear shaft?
Yes. As an authorized JIC Hydraulics distributor, Việt Trung Hải keeps A8VO160 rear drive shafts in stock, genuine and JIC, to the same code and spline tolerances. Contact us to confirm the code and get a fast quote.
Get a quote
Request a quote: Rear drive shaft – Rexroth-Uchida A8VO160
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOFront drive shaft – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VORotary group – Rexroth A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8VO160A8VO160On requestView · get a quoteTechnical handbook