
Front drive shaft – Rexroth-Uchida A8VO160
Quick answer
The Rexroth-Uchida A8VO160 front drive shaft is the input shaft that carries engine torque into the cylinder block to turn the A8VO160 main pump, fitted on roughly 30-tonne excavators.
Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks genuine and JIC shafts to the correct code, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8VO160
- Condition
- New, correct code
- Availability
- On request
What the A8VO160 front drive shaft fits
The Rexroth-Uchida A8VO160 front (input) drive shaft takes torque straight from the engine and passes it into the cylinder block to turn the pump's rotary group. Unlike the rear shaft — which couples to the second unit in a tandem pump — the front shaft mates with the engine output and carries the full start-up load. The A8VO160 main pump is an axial-piston unit fitted on roughly 30-tonne excavators.
Signs it needs replacing
Play or wobble at the shaft, worn splines at the drive end, knocking under load, or oil weeping past the seal all mean the shaft is due. Replace the seal and bearing at the same time.
Choosing quality
A drive shaft lives under constant torsional and shock load, so material, heat treatment and spline machining decide its life. Việt Trung Hải supplies A8VO160 front shafts genuine and JIC Hydraulics — we are an authorized JIC distributor, and the JIC shaft carries the correct code and spline form, so the engine coupling grips without backlash. Contact us for a fast quote.
Frequently asked questions
What is the difference between the front and rear A8VO160 shaft?
The front shaft is the input shaft that mates with the engine output and carries start-up load. The rear shaft couples to the second unit in a tandem pump. They differ in position and spline profile, so order the correct one.
Which excavator does the A8VO160 pump fit?
The Rexroth-Uchida A8VO160 is an axial-piston main pump typically fitted on excavators around 30 tonnes. The front shaft is the drive part inside this pump; Việt Trung Hải helps you match the correct code to your pump and machine.
What should I replace along with the drive shaft?
Replace the shaft seal and bearing together with the shaft, since a worn shaft usually brings oil leaks and misalignment. Doing it as a set prevents vibration, knocking and damage spreading to the cylinder block.
Get a quote
Request a quote: Front drive shaft – Rexroth-Uchida A8VO160
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VORear drive shaft – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VORotary group – Rexroth A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8VO160A8VO160On requestView · get a quoteTechnical handbook