Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Rexroth A8VO160

Uchida/Rexroth · A8VO

Cylinder block – Rexroth A8VO160

New, correct codeOn requestA8VO160

Quick answer

The A8VO160 cylinder block is the barrel holding the piston bores that rotate around the drive shaft, fitted in the Rexroth-Uchida A8VO160 main pump on roughly 30-tonne excavators. When its valve-plate face or piston bores wear, the pump weakens and loses pressure.

Việt Trung Hải supplies genuine and JIC blocks, both on the A8VO160 code, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Uchida/Rexroth · A8VO
Model code
A8VO160
Condition
New, correct code
Availability
On request

Cylinder block for the A8VO160 pump

The cylinder block is the barrel holding the piston bores that rotate around the drive shaft, where pistons reciprocate to move oil. In the Rexroth-Uchida A8VO160 main pump — a variable axial-piston unit used on roughly 30-tonne excavators — it is a core load-bearing part, and the flatness and finish of its valve-plate face set the pump's suction and delivery efficiency.

When to replace

A worn A8VO160 block shows up as gradual power loss, pressure drop under load, sluggish digging or fast oil heating. Scoring, pitting or ring marks on the valve-plate face, or scratches in the piston bores, mean the block is finished. Running it on damages the pistons and valve plate and sheds metal into the oil.

Choosing quality parts

Replace with the correct A8VO160 code and match it with the pistons and valve plate. Việt Trung Hải supplies genuine and JIC blocks — material, heat treatment and the machined distribution face all on code, so the block sits where it should with no fitting work. Contact VTH for a fast quote.

Frequently asked questions

Which excavator does the A8VO160 block fit?

The A8VO160 is a Rexroth-Uchida main pump for around 30-tonne excavators. The cylinder block sits inside this pump; when replacing, use the correct A8VO160 code and match the pistons and valve plate so the pump runs stably.

When should the A8VO160 cylinder block be replaced?

When the pump gradually weakens, loses pressure under load, digs sluggishly or heats oil fast, and the valve-plate face is scored or pitted or the piston bores are scratched. Running it on damages the pistons and valve plate too.

Will a JIC A8VO160 block match my existing pistons and valve plate?

Yes. Việt Trung Hải distributes JIC blocks machined to the A8VO160 code, with the distribution face and bores on the fitting tolerances, so they pair with the pistons and valve plate already in the pump. VTH also stocks genuine blocks on code, quoted fast.

Get a quote

Request a quote: Cylinder block – Rexroth A8VO160

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides