
Drive shaft – Rexroth-Uchida A8VO160
Quick answer
The Rexroth-Uchida A8VO160 drive shaft transmits engine torque into the cylinder block of the A8VO160 main pump, used on roughly 30-ton class excavators. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies genuine and JIC shafts to the correct code and spline tolerance, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8VO160
- Condition
- New, correct code
- Availability
- On request
What the A8VO160 drive shaft does
The drive shaft transmits torque from the engine into the cylinder block to spin the pump's rotary group. This one fits the Rexroth-Uchida A8VO160 main pump — the primary hydraulic pump on roughly 30-ton class excavators. When ordering, confirm the spline tooth count and whether you need the front or rear shaft (tandem pump).
When to replace it
Worn or rounded splines cause lost drive and knocking under throttle; a scored seal journal leaks oil; a bent or cracked shaft brings vibration and heat. Replace the shaft and check the mating bushings and seals.
Choosing quality
Việt Trung Hải, an authorized JIC Hydraulics distributor, ships the A8VO160 shaft on the JIC code — spline pitch and journal sizes to tolerance, so the rotary group turns true once it is in. Genuine shafts sit alongside, on the same code. Contact us for a fast quote.
Frequently asked questions
Which excavator does the A8VO160 drive shaft fit?
It is the drive shaft for the Rexroth-Uchida A8VO160 main pump, typically fitted on roughly 30-ton class crawler excavators. When ordering, tell us the spline tooth count and whether you need the front or rear shaft so we ship the correct part.
How do I know the drive shaft needs replacing?
Common signs are worn or loose splines that cause lost drive and knocking under throttle, a scored journal that leaks oil, or a bent or cracked shaft causing vibration. Replace the shaft and inspect the mating bushings and seals.
Will a JIC A8VO160 shaft fit the original pump?
It will. The JIC shaft is machined to the A8VO160 code, with the correct spline count and journal dimensions, so it meshes with the original cylinder block and coupling without rework. We are an authorized JIC Hydraulics distributor — contact us for a fast quote.
Get a quote
Request a quote: Drive shaft – Rexroth-Uchida A8VO160
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VORear drive shaft – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOFront drive shaft – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VORotary group – Rexroth A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8VO160A8VO160On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8VO160A8VO160On requestView · get a quoteTechnical handbook