
Valve plate – Rexroth A10VO28
Quick answer
The A10VO28 valve plate is the high/low-pressure porting plate for the Rexroth-Uchida A10VO28 main pump on mini excavators, timing each piston's intake and discharge. When it scores or wears, the pump builds pressure slowly and loses power.
Việt Trung Hải supplies JIC plates on code that run in the original housing, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Uchida/Rexroth · A10V
- Model code
- A10VO28
- Condition
- New, correct code
- Availability
- On request
What the A10VO28 valve plate does
The valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge. On the Rexroth-Uchida A10VO28 — a compact axial-piston main pump used on mini excavators — it carries load every revolution, so flatness and surface finish drive both pump output and service life.
When to replace
Scoring, pitting or wear grooves along the port kidneys let the pump leak internally: slow pressure build-up, weak digging, fast oil heating and pressure drop under load. Blue or brown heat discoloration means the face has scorched — replace early before the damage spreads to the cylinder block.
Choosing quality parts
A correct A10VO28 valve plate must be dead flat, mirror-lapped and surface-hardened. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC plate carries that code and the interchange tolerances of the Rexroth-Uchida pump, so it runs right in the original housing with no extra lapping. Contact us for a fast quote.
Frequently asked questions
Which excavator does the A10VO28 valve plate fit?
It fits the Rexroth-Uchida A10VO28 main pump, a compact axial-piston unit used on mini excavators. Send us your pump code and machine model and Việt Trung Hải will confirm the exact part and quote it quickly.
How do I know the valve plate is worn?
Scoring, pitting or wear grooves along the ports cause internal leakage: slow pressure build-up, weak digging, fast oil heating and pressure drop under load. Heat discoloration on the face signals scorching and means it should be replaced soon.
Does fitting a JIC plate on an A10VO28 mean reworking the pump?
No. Việt Trung Hải is an authorized JIC Hydraulics distributor. The JIC A10VO28 plate is lapped flat, polished and surface-hardened to spec and sized to the code, so it works in the original housing as it comes. We ship the right code with a fast quote.
Get a quote
Request a quote: Valve plate – Rexroth A10VO28
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A10VRotary group kit – Rexroth A10VO28A10VO28On requestView · get a quote
Uchida/Rexroth · A10VSwash plate – Rexroth-Uchida A10VO28A10VO28On requestView · get a quote
Uchida/Rexroth · A10VRetainer plate – Rexroth-Uchida A10VO28A10VO28On requestView · get a quote
Uchida/Rexroth · A10VPin – Rexroth-Uchida A10VO28A10VO28On requestView · get a quote
Uchida/Rexroth · A10VPiston – Rexroth A10VO28A10VO28On requestView · get a quote
Uchida/Rexroth · A10VBall guide – Rexroth-Uchida A10VO28A10VO28On requestView · get a quote
Uchida/Rexroth · A10VCylinder block – Rexroth A10VO28A10VO28On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V40A10V40On requestView · get a quoteTechnical handbook