Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Pin – Rexroth-Uchida A10VO28

Uchida/Rexroth · A10V

Pin – Rexroth-Uchida A10VO28

New, correct codeOn requestA10VO28

Quick answer

The Rexroth-Uchida A10VO28 rotary group is the rotating assembly that generates flow and pressure inside the small A10VO main pump on mini excavators.

Việt Trung Hải stocks genuine and JIC sets to the correct code — as JIC Hydraulics' authorized distributor — fitting the original A10VO housing, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Uchida/Rexroth · A10V
Model code
A10VO28
Condition
New, correct code
Availability
On request

Rexroth-Uchida A10VO28 rotary group — what it fits

The A10VO28 rotary group is the rotating assembly inside the A10VO small-displacement main pump used on mini excavators. Cylinder block, pistons, valve plate, swash plate and drive shaft work together here to generate the flow and pressure that drive the bucket, arm, boom and travel motors.

When to replace

A worn rotary group shows up as a weak, sluggish machine that loses power under load, oil that heats quickly, and unusual pump whine. Teardown often reveals a scored valve plate and wear face, worn cylinder block and piston shoes, and rising case drain — sometimes metal in the oil.

Choosing quality parts

This assembly runs under high pressure and constant friction, so material, heat treatment and machining precision decide its life. Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks the A10VO28 rotary group in genuine and JIC form: JIC machines it to the same code, surface hardness and fitting tolerance, so the whole stack turns evenly with no part taking uneven load. Call VTH for advice and a fast quote.

Frequently asked questions

Which excavator does the A10VO28 rotary group fit?

The A10VO28 is a small Rexroth-Uchida A10VO main pump, typically fitted on mini excavators. The rotary group covers the cylinder block, pistons, valve plate and swash plate. Send your pump code and nameplate photo so VTH can confirm the exact fit before quoting.

When should I replace the rotary group instead of the whole pump?

If the machine is weak and slow, oil heats fast, and teardown shows a scored valve plate and wear face or worn pistons, a new rotary group usually restores flow without replacing the whole pump. VTH advises based on the actual condition of your assembly.

What is in an A10VO28 rotary group?

The set covers the cylinder block, pistons with their shoes, valve plate, wear face, springs and drive shaft — the pump's entire rotating side. Việt Trung Hải ships the complete set to the A10VO28 code, genuine or JIC; we are JIC Hydraulics' authorized distributor.

Get a quote

Request a quote: Pin – Rexroth-Uchida A10VO28

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides