Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Kawasaki K3SP36

Kawasaki · K3SP

Valve plate – Kawasaki K3SP36

New, correct codeOn requestK3SP36

Quick answer

The K3SP36 valve plate is the high/low-pressure porting plate inside Kawasaki's K3SP main piston pump, used on small and mini excavators. Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks genuine and JIC K3SP36 plates, each cut to the same code and port sizes so it seals in the original pump. Fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · K3SP
Model code
K3SP36
SKU
2021-590-1-132
Condition
New, correct code
Availability
On request

The valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge inside the pump. The K3SP36 belongs to Kawasaki's K3SP main piston-pump family, fitted on small and mini excavators. Sitting between the cylinder block and pump housing, it carries the full pressure difference between intake and discharge, so its face must stay flat and perfectly sealed.

When the plate is scored, pitted, or worn at the kidney ports, oil leaks from the high- to low-pressure side: the pump weakens, the machine stays slow under throttle, and the hydraulics feel weak under load. Oil heats up and a whine can appear. Replace it before the damage spreads to the block and pistons.

Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks genuine K3SP36 plates and JIC plates — same code, same port sizes, each seating in the original pump with the ports lined up and nothing to lap. Fast quotes.

Frequently asked questions

Which pump does the K3SP36 valve plate fit?

The K3SP36 valve plate belongs to Kawasaki's K3SP main piston-pump family, typically fitted on small and mini excavators. Tell VTH your machine model and pump code so we can match the correct part before quoting.

How do I know the valve plate is worn?

A scored or worn valve plate leaks internally, so the pump weakens, the machine stays slow under throttle, the hydraulics feel weak under load, and oil heats up with a whine. Inspect and replace early to avoid damaging the block and pistons.

Does VTH stock the K3SP36 valve plate?

Yes. Việt Trung Hải is an authorized JIC Hydraulics distributor and keeps genuine and JIC K3SP36 plates on the shelf — same code, sealing in the original pump with no lapping needed. Contact VTH to check stock and get a fast quote matched to your pump version.

Get a quote

Request a quote: Valve plate – Kawasaki K3SP36

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides