Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Kawasaki K3SP36

Kawasaki · K3SP

Cylinder block – Kawasaki K3SP36

New, correct codeOn requestK3SP36

Quick answer

The Kawasaki K3SP36 cylinder block is the barrel holding the piston bores of the K3SP main pump, used on small-to-mid excavators, where pistons move oil in and out.

Việt Trung Hải, an authorized JIC distributor, supplies JIC and genuine blocks on the correct code with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Kawasaki · K3SP
Model code
K3SP36
SKU
2021-590-1-240
Condition
New, correct code
Availability
On request

Kawasaki K3SP36 cylinder block — what it fits

The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; pistons reciprocate in each bore to draw and discharge oil. The K3SP36 block belongs to Kawasaki's K3SP axial-piston main pump family, used on small-to-mid excavators. It is a directly loaded part — its face rides against the valve plate under constant pressure and friction.

Signs it needs replacing

Weak flow and pressure loss, sluggish digging or slow boom lift under load, scoring or uneven wear on the valve-plate face, tapered or scratched piston bores, internal leakage, and metal debris in the pump housing.

Choosing quality

Face flatness and bore tolerance decide pump life and efficiency. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies the K3SP36 block in JIC and genuine form — same code, correct material and heat treatment, bore clearances inside the factory fit limits, so the rotating group beds evenly on the valve plate. Send your pump code and we will match the variant and quote fast.

Frequently asked questions

Which pump and machine does the K3SP36 block fit?

The K3SP36 is the cylinder block for Kawasaki's K3SP axial-piston main pump, typically on small-to-mid excavators. Send your pump code and machine model and Việt Trung Hải will confirm the exact part and quote quickly.

When should the cylinder block be replaced?

When the pump loses pressure, digging slows, oil overheats, or the block face is scored and piston bores are tapered, causing internal leakage. Inspect the valve plate and pistons at the same time and replace them as a set.

Do I have to reset any clearance after fitting a K3SP36 block?

No. The JIC K3SP36 block is made to original fit tolerances: the pistons land on the right clearance and the face beds correctly on the valve plate as assembled. Check the valve plate and spring pack, torque to spec, then run it in under light load. Việt Trung Hải is an authorized JIC Hydraulics distributor.

Get a quote

Request a quote: Cylinder block – Kawasaki K3SP36

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides