Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Rexroth A8V80

Uchida/Rexroth · A8VO

Valve plate – Rexroth A8V80

New, correct codeOn requestA8V80

Quick answer

The A8V80 valve plate is the porting plate that times high- and low-pressure flow in a Rexroth/Uchida A8VO main pump on medium-class excavators.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC A8V80 plates on code that bed tight against the original block, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Uchida/Rexroth · A8VO
Model code
A8V80
Condition
New, correct code
Availability
On request

What the A8V80 valve plate fits

The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. The A8V80 belongs to the Rexroth/Uchida A8VO main-pump family — axial-piston pumps on medium-class excavators. Within the series the A8VO55 runs ~13t machines and the A8VO107 runs ~20t; the A8V80 sits between them, on mid-size units. Fit it by exact part code and correct port orientation.

Signs of wear

A worn valve plate shows scoring, pitting or circular scratches on the contact face. As it opens up, high-pressure oil leaks to the low side: the pump weakens, cylinders extend slowly and oil overheats. Blue heat discoloration or metal in the oil means open the pump now.

Choosing quality

Material, heat treatment and surface flatness decide service life. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the JIC A8V80 plate: machined to spec, an even surface finish, and interchange tolerances that let it run right in the original A8VO pump. Contact VTH for a fast quote.

Frequently asked questions

Which pump does the A8V80 valve plate fit?

The A8V80 is the valve plate for the Rexroth/Uchida A8VO main pump on medium-class excavators. In the family the A8VO55 runs ~13t machines and the A8VO107 ~20t, with the A8V80 between them. Quote your pump code so we match port orientation.

How do I know the valve plate is worn?

Common signs are a weak pump, slow cylinders, power loss under load and oil that heats up fast. Open the pump: scoring, pitting, heat discoloration on the plate or metal in the oil means it is time to replace the valve plate.

Will the JIC A8V80 plate seal in an old pump?

It will. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC A8V80 plate has the correct material, heat treatment and face flatness, and it holds the code's interchange tolerances, so it beds tight against the original block. Contact VTH to confirm the code and get a fast quote.

Get a quote

Request a quote: Valve plate – Rexroth A8V80

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides