
Piston ring – Rexroth-Uchida A8V80
Quick answer
The A8V80 pistons reciprocate in the cylinder block of the Rexroth-Uchida A8VO-family main pump used on mid-size excavators; worn pistons cost the pump its pressure. Việt Trung Hải stocks genuine and JIC A8V80 pistons, each cut to the code so the block keeps its original working clearance. Fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Piston
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8V80
- Condition
- New, correct code
- Availability
- On request
A8V80 pistons — what they fit
The pistons (Vietnamese trade name "bi bơm") reciprocate inside the cylinder block of an axial-piston pump. Each piston rides the swash plate through a slipper, drawing and delivering oil to build the pump's flow and pressure. This set fits the Rexroth-Uchida A8V80 main pump, part of the A8VO family used on mid-size excavators. Worn pistons cost the whole pump its pressure.
When to replace
Weak power, slow lift, fast heat build-up and pump noise are common signs. On teardown, check for scored or pitted piston faces, loose or peeling slipper pads, and widened bore clearance; metal in the oil confirms wear. Replace as a matched set to the correct A8V80 code.
Choosing quality parts
Việt Trung Hải is an authorized JIC Hydraulics distributor: JIC A8V80 pistons carry the A8V80 code with the barrel and slipper held to the size the drawing calls for, so the block keeps its original working clearance and nothing needs reaming or re-lapping. Genuine pistons sit on the same shelf. Material, heat treatment and machining finish decide how long the pump lasts after overhaul. Contact us for a fast quote.
Frequently asked questions
Which pump and machine do A8V80 pistons fit?
This piston set fits the Rexroth-Uchida A8V80 main pump from the A8VO family used on mid-size excavators. Send your pump code and machine model and Việt Trung Hải will confirm the exact part before quoting.
Should I replace the pistons as a full set?
Yes. Pistons and the cylinder block wear as a matched pair, so replacing only a few upsets the clearance and fails again quickly. A full A8V80 set keeps pressure and lasts longer after overhaul.
Does the block need re-lapping when I fit JIC A8V80 pistons?
No. JIC A8V80 pistons carry the correct code and barrel size, so they reach the right working clearance in the original bores without reaming or re-lapping. Việt Trung Hải is an authorized JIC Hydraulics distributor and keeps genuine pistons in stock as well. Contact us to check stock and get a fast quote.
Get a quote
Request a quote: Piston ring – Rexroth-Uchida A8V80
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth A8V80A8V80On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8V80A8V80On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8V80A8V80On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8V80A8V80On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V86A8V86On requestView · get a quoteTechnical handbook