Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Rexroth A8V80

Uchida/Rexroth · A8VO

Cylinder block – Rexroth A8V80

New, correct codeOn requestA8V80

Quick answer

The A8V80 is the cylinder block of a Rexroth (Uchida) A8VO-series main pump used on mid-size excavators.

Việt Trung Hải supplies genuine and JIC blocks made to the A8V80 code and ready for the original housing, with a fast quote once you send the code.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Uchida/Rexroth · A8VO
Model code
A8V80
Condition
New, correct code
Availability
On request

A8V80 cylinder block — which pump and machine

The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; the pistons reciprocate to move oil, setting the pump's flow and pressure. The A8V80 belongs to Rexroth (Uchida) A8VO-series axial-piston pumps — a main pump on mid-size excavators. Within the A8VO family, neighbouring sizes serve different classes: A8VO55 around 13-tonne machines, A8VO107 the 20-tonne class; the A8V80 sits in the compact-to-mid range. Send the pump code and serial to confirm the exact unit.

When to replace

A scored, pitted or polished valve-plate face and tapered piston bores raise internal leakage. You'll see weak flow, slow booms, oil overheating and metal chips in the oil. Replace the matched block-and-piston set rather than lapping a deeply scored block.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies A8V80 blocks in genuine and JIC, cut to code so they run in the original housing straight away. Send the code for a fast quote.

Frequently asked questions

Which excavator does the A8V80 block fit?

The A8V80 is the cylinder block for a Rexroth (Uchida) A8VO-series main pump on mid-size excavators. Since one pump code can appear on several machine models, send the serial number and machine name so Việt Trung Hải can match the exact unit before quoting.

Should I lap the old block or replace it?

Light scoring can sometimes be lapped. Once the piston bores taper or the block face is deeply pitted, internal leakage rises and the pump weakens; replacing the matched block-and-piston set to the correct code lasts longer and runs more reliably.

How is the running face of a JIC A8V80 block finished?

JIC selects the material, heat treats it and laps the running face to the finish that seals against the valve plate, at A8V80 dimensions, so it goes into the old pump and works. Việt Trung Hải distributes JIC and stocks genuine blocks too, with fast quotes.

Get a quote

Request a quote: Cylinder block – Rexroth A8V80

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides