
Valve plate – Komatsu HPV95
Quick answer
The Komatsu HPV95 valve plate is the porting plate that times oil intake and discharge in the HPV95 main pump, fitted to ~20-tonne class excavators such as the Komatsu PC200.
Việt Trung Hải supplies Komatsu genuine and JIC Hydraulics plates on code, straight into the original pump, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV95
- Condition
- New, correct code
- Availability
- On request
What the Komatsu HPV95 valve plate fits
The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. On the Komatsu HPV95 main pump – the piston pump fitted to ~20-tonne class excavators such as the Komatsu PC200 – it runs under high pressure and heavy sliding speed, so its flatness and surface finish set the efficiency of the whole pump.
Signs it needs replacing
Deep scoring, pitting or edge wear on the plate lets oil leak from the high- to the low-pressure port. The pump goes weak, controls slow down, oil heats quickly and the machine loses power under load. Inspect the valve plate and cylinder block together.
Choosing quality
A valve plate has to be wear-resistant, hardened and ground flat to sit tight against the block. Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC HPV95 plate carries the correct Komatsu code, with the locating hole and kidney-port orientation exactly as on the original, so it swaps straight into the pump with nothing to modify. Komatsu genuine plates are in stock as well. Contact us for a fast quote and technical advice.
Frequently asked questions
Which excavator does the HPV95 valve plate fit?
The valve plate sits in the Komatsu HPV95 main pump, the piston pump used on ~20-tonne class excavators such as the Komatsu PC200. Việt Trung Hải stocks the correct HPV95 part and can help confirm your pump version.
When should the HPV95 valve plate be replaced?
Replace it when the surface is deeply scored, pitted or worn, causing weak pumping, slow controls, fast oil heating and power loss under load. Inspect the valve plate together with the cylinder block before deciding.
Does Việt Trung Hải carry genuine HPV95 valve plates?
Yes. Việt Trung Hải stocks Komatsu genuine HPV95 plates and, as an authorized JIC Hydraulics distributor, JIC plates cut to the same code that drop into the original pump. Contact us for a fast quote and help selecting the correct part.
Get a quote
Request a quote: Valve plate – Komatsu HPV95
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVPiston pump – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVRear drive shaft – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVFront drive shaft – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV95HPV95On requestView · get a quoteTechnical handbook