Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Front drive shaft – Komatsu HPV95

Komatsu · HPV

Front drive shaft – Komatsu HPV95

New, correct codeOn requestHPV95

Quick answer

The Komatsu HPV95 front drive shaft is the input shaft of the main pump, taking drive from the engine to turn the rotary group on PC200-class 20-ton excavators.

Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks genuine and JIC shafts to the same code, ready to fit, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Komatsu · HPV
Model code
HPV95
Condition
New, correct code
Availability
On request

Komatsu HPV95 front drive shaft — what it fits

This is the FRONT (input) drive shaft for the Komatsu HPV95 main pump — the shaft that takes drive straight from the engine and turns the pump's rotary group. The HPV95 is the main pump on Komatsu PC200-class excavators, around 20 tons. Unlike the rear shaft, which couples to the second pump group in a tandem unit, the front shaft carries the incoming load, so its splines see the most wear.

Signs it needs replacing

Worn or chipped splines cause play and a knocking noise under load; a scored seal journal leaks oil; a bent shaft makes the pump vibrate, run hot and lose pressure.

Choosing quality parts

Việt Trung Hải supplies the HPV95 front shaft genuine and JIC — we distribute for JIC Hydraulics, and the JIC shaft is hardened steel cut to the same code, meshing with the existing cylinder block straight away. Call us for a fast quote.

Frequently asked questions

How does the front HPV95 shaft differ from the rear one?

The front shaft is the input shaft driven straight by the engine; the rear shaft couples to the second pump group in a tandem unit. They differ in position and splines, so order the correct one and tell Việt Trung Hải which you need.

Which excavator uses the HPV95 pump?

The Komatsu HPV95 main pump is fitted on Komatsu PC200-class excavators, around 20 tons, and the front shaft transmits drive to that pump. If you are unsure of the pump code, send photos and Việt Trung Hải will identify it.

Do the splines need dressing when fitting a JIC shaft to an HPV95?

No. The JIC shaft is machined to the HPV95 code and spline tolerances and checked before dispatch, so it meshes with the original cylinder block and takes full torque. Việt Trung Hải is an authorized JIC Hydraulics distributor and also stocks genuine shafts.

Get a quote

Request a quote: Front drive shaft – Komatsu HPV95

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides