
Swash plate – Komatsu HPV95
Quick answer
The HPV95 swash plate is the fixed angled plate in the Komatsu HPV95 main pump on 20-ton excavators like the PC200; its tilt sets piston stroke and pump flow.
Việt Trung Hải stocks genuine and JIC parts to the correct code.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Swash plate
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV95
- Condition
- New, correct code
- Availability
- On request
What the Komatsu HPV95 swash plate fits
The swash plate is the fixed, angled plate inside the Komatsu HPV95 main pump. As the cylinder block turns, the piston shoes slide across its face; the plate's tilt angle sets piston stroke and the oil flow the pump delivers. The HPV95 is used on 20-tonne-class excavators such as the Komatsu PC200. A flat, hard, mirror-smooth face holds flow and pressure steady.
When to replace
- A scored, pitted or dished sliding face that has lost its oil film.
- Weak, slow machine movement and poor boom and travel power.
- A pump that runs hot and noisy under load.
- Metal particles in the hydraulic oil.
A worn face lets the pistons ride unevenly, dropping flow and pressure; left too long it takes the whole pump with it, so replace early.
Choosing quality parts
A plate made to the correct code holds the right flatness and surface hardness, so the shoes bear evenly and the whole rotating group runs without load skew. Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC plate for the Komatsu HPV95 is on code, in the right material and sized to the standard housing, so it runs true from the start. Genuine parts are stocked, with a fast quote.
Frequently asked questions
Which machine uses the HPV95 pump?
20-tonne-class excavators such as the Komatsu PC200.
When should it be replaced?
When the face is scored, pitted or dished, the machine is weak and slow, the pump runs hot and noisy, and there is metal debris in the oil.
What do you need in order to match the plate?
Send the pump code stamped on the housing, the machine model and a photo of the old plate face. Việt Trung Hải cross-checks it and ships genuine or JIC to the HPV95 code.
Get a quote
Request a quote: Swash plate – Komatsu HPV95
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVPiston pump – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVRear drive shaft – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVFront drive shaft – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV95HPV95On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV95HPV95On requestView · get a quoteTechnical handbook