Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Swash plate – Kawasaki K3V63DT

Kawasaki · K3V

Swash plate – Kawasaki K3V63DT

New, correct codeOn requestK3V63DT

Quick answer

The K3V63DT swash plate is the angled plate in the Kawasaki K3V main pump on ~13-tonne excavators (Komatsu PC120, Kobelco SK130); the shoes slide on it and its tilt angle sets the oil flow.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Swash plate
Brand / pump line
Kawasaki · K3V
Model code
K3V63DT
SKU
2021-590-1-38
Condition
New, correct code
Availability
On request

What the K3V63DT swash plate fits

The swash plate is the fixed, angled plate inside the Kawasaki K3V main piston pump; the piston shoes press and slide across its face as the cylinder block turns. The K3V63DT serves pumps on roughly 13-tonne excavators such as the Komatsu PC120 and Kobelco SK130. Its tilt angle sets the piston stroke and therefore the oil flow, while a flat, hard face keeps that flow and pressure steady.

Signs it needs replacing

A scored, pitted or unevenly worn face widens the oil clearance and saps the pump. The machine slows, loses pressure under load, the oil heats up and metal particles appear; the pump may knock and vibrate. During an overhaul, inspect and replace the swash plate together with the piston shoes.

Choosing quality parts

Because the plate carries load and sliding contact at high pressure, its material, surface hardness and machining precision decide its service life. Việt Trung Hải distributes for JIC Hydraulics under authorization and carries the K3V63DT plate from Kawasaki and from JIC under the same code: the JIC face is ground to interchange tolerance, so clearance is right in the original housing and no lapping is needed. Send your pump code for a fast quote.

Frequently asked questions

Which machines use the K3V63DT swash plate?

About 13-tonne excavators such as the Komatsu PC120 and Kobelco SK130 running the Kawasaki K3V63DT pump.

Is the swash plate the same as the piston shoe?

No. The swash plate is the fixed angled plate; the piston shoes are the parts that slide across it.

When should the swash plate be replaced?

When the face is scored, pitted or unevenly worn, the pump weakens, oil heats and shows metal fines; usually with the shoes during overhaul.

Get a quote

Request a quote: Swash plate – Kawasaki K3V63DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides