Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Spring – Kawasaki K3V63DT

Kawasaki · K3V

Spring – Kawasaki K3V63DT

New, correct codeOn requestK3V63DT

Quick answer

The Kawasaki K3V63DT rotary-group spring presses the cylinder block against the valve plate to keep the main pump sealed on ~13-tonne excavators like the Komatsu PC120 and Kobelco SK130.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC K3V63DT springs to code and to interchange tolerances for a direct fit, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · K3V
Model code
K3V63DT
SKU
2021-590-1-126
Condition
New, correct code
Availability
On request

Rotary-group spring for Kawasaki K3V63DT

The spring sits inside the pump's rotary group and presses the cylinder block against the valve plate, holding the seal at startup before oil pressure builds. It belongs to the Kawasaki K3V63DT main pump, the piston-pump family used on ~13-tonne excavators such as the Komatsu PC120 and Kobelco SK130.

When to replace

A fatigued or weakened spring makes the pump slow to build pressure and sluggish on cold starts. If it takes a permanent set, cracks or breaks, the cylinder block leaks internally, the pump grows noisy and pressure drops under load. Corrosion shortens its life too.

Genuine-quality parts

Spring steel and heat treatment decide load consistency and fatigue life. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies JIC K3V63DT springs — correct code, correct material, machined to interchange tolerances, so they go into the standard rotary group as they are. Contact us for a fast quote.

Frequently asked questions

Which excavators use the K3V63DT spring?

It is the spring inside the Kawasaki K3V63DT main pump rotary group, fitted to ~13-tonne excavators such as the Komatsu PC120 and Kobelco SK130. Việt Trung Hải confirms the correct code for your machine and pump before shipping.

How do I know the pump spring is weak?

Common signs are slow pressure build-up, weak cold starts, unusual noise and loss of power under heavy load. If the spring cracks or breaks, the cylinder block leaks internally and the whole rotary group should be inspected.

Can I buy just the K3V63DT spring and fit it to my existing rotary group?

Yes. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies JIC K3V63DT springs to the correct code and free length, so they load an existing rotary group properly with nothing to modify. We will also advise which other parts are worth doing at the same time, and quote quickly.

Get a quote

Request a quote: Spring – Kawasaki K3V63DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides