
Front drive shaft – Kawasaki K3V63DT
Quick answer
The Kawasaki K3V63DT front drive shaft is the engine-side input shaft that transmits torque to rotate the K3V63DT main pump, fitted to ~13-ton excavators such as the Komatsu PC120 and Kobelco SK130.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC shafts to the same code, ready to fit, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Kawasaki · K3V
- Model code
- K3V63DT
- SKU
- 2021-590-1-28
- Condition
- New, correct code
- Availability
- On request
Kawasaki K3V63DT front drive shaft — what it fits
This is the front (input) drive shaft for the Kawasaki K3V63DT main pump. It takes drive straight from the engine and transmits torque into the cylinder block to spin the rotary group. Unlike the rear shaft, which couples to the second unit of a tandem pump, the front shaft is the engine-side input. The K3V63DT main pump powers ~13-ton excavators such as the Komatsu PC120 and Kobelco SK130.
When to replace
Worn, chipped or backlashed splines cause pump noise, vibration or loss of drive; watch for scored journals, worn bearing seats, or a bent shaft that lets the seal weep. Once the splines are rounded or the tooth roots crack, replace the shaft to protect the block and bearings.
Choosing the right part
Match the code, spline count and length exactly. Việt Trung Hải supplies K3V63DT drive shafts genuine and JIC — as an authorized JIC Hydraulics distributor, we sell JIC's own shafts in hardened steel, splines cut to mesh straight into the existing pump. Contact us for a fast quote.
Frequently asked questions
What is the difference between the front and rear K3V63DT shaft?
The front shaft is the input, coupling directly to the engine to drive the pump. The rear shaft links to the second unit in a tandem pump. They differ in position and often in spline count, so order the correct one.
Which excavators use the K3V63DT pump?
The Kawasaki K3V63DT main pump is fitted to ~13-ton class excavators, typically the Komatsu PC120 and Kobelco SK130. The front drive shaft is the internal drive component inside this pump assembly.
Does the JIC shaft need machining to fit the K3V63DT?
No. The JIC shaft is cut to the K3V63DT code, spline count and length, so it goes straight into the original pump housing with no reaming or fitting work. Việt Trung Hải is an authorized JIC Hydraulics distributor and carries genuine shafts as well. Send your machine model and a photo of the shaft for a fast quote.
Get a quote
Request a quote: Front drive shaft – Kawasaki K3V63DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · K3VRotary group kit – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VSwash plate – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VShoe plate – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VRetainer plate – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VSpring – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VValve plate – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VPiston – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VBall guide – Kawasaki K3V63DTK3V63DTOn requestView · get a quoteTechnical handbook