Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Drive shaft – Kawasaki K3V180DT

Kawasaki · K3V

Drive shaft – Kawasaki K3V180DT

New, correct codeOn requestK3V180DT

Quick answer

The Kawasaki K3V180DT drive shaft transmits torque from the engine into the cylinder block of the K3V180DT main pump, used on large excavators in the ~35–45 tonne class.

Việt Trung Hải supplies the correct-code shaft in genuine and JIC (JIC Hydraulics) form, seating in the original block at the right clearance, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kawasaki · K3V
Model code
K3V180DT
SKU
2021-590-1-4
Condition
New, correct code
Availability
On request

What the K3V180DT drive shaft fits

The drive shaft transmits torque from the engine into the cylinder block to rotate the pump's rotary group. This shaft fits the Kawasaki K3V180DT main pump, a piston pump used on large excavators in the roughly 35–45 tonne class. Its splines mesh with the cylinder block and couple to the pump's drive input, so spline accuracy and concentricity decide whether the pump takes load smoothly or develops backlash.

When to replace

Watch for play and noise at the coupling, vibration under load, weak or lost flow from drive slip, worn or chipped splines, and a scored shaft seat leaking at the seal. A slight twist also makes the pump run rough. Replace early to avoid damaging the cylinder block.

Choosing quality

The shaft carries heavy torque, so material and heat treatment are critical. Việt Trung Hải is an authorized JIC Hydraulics distributor, supplying the K3V180DT drive shaft in genuine and JIC form — cut to the code and fitting tolerance, so it seats in the original block and housing at the right clearance. Fast quotes.

Frequently asked questions

Which excavator uses the K3V180DT drive shaft?

It is the drive shaft for the Kawasaki K3V180DT main pump, a piston pump fitted to large excavators in roughly the 35–45 tonne class. Match the exact pump model and spline type so the shaft meshes correctly with the cylinder block.

How do I know the drive shaft needs replacing?

Common signs are play and noise at the coupling, vibration under load, weak pump output from drive slip, worn or chipped splines, and a scored seat leaking at the seal. Replace early to avoid damaging the cylinder block.

The K3V180DT comes with different spline types — how do I pick?

Input spline patterns vary by pump build, so count the teeth and measure the diameter before ordering. Việt Trung Hải, an authorized JIC Hydraulics distributor, carries the K3V180DT in genuine and JIC form and ships the matching spline type, with a fast quote.

Get a quote

Request a quote: Drive shaft – Kawasaki K3V180DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides