Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Kawasaki K3V180DT

Kawasaki · K3V

Rotary group kit – Kawasaki K3V180DT

New, correct codeOn requestK3V180DT

Quick answer

The K3V180DT rotary group is the rotating assembly inside a Kawasaki K3V piston pump, fitted to ~35–45 ton excavators. It includes the cylinder block, pistons, valve plate, swash plate and drive shaft that produce the pump's flow and pressure.

Việt Trung Hải supplies the correct part with technical advice and a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · K3V
Model code
K3V180DT
SKU
2021-30426
Condition
New, correct code
Availability
On request

What the K3V180DT rotary group fits

The K3V180DT rotary group is the rotating assembly inside a Kawasaki K3V piston pump, typically fitted to ~35–45 ton excavators. It contains the cylinder block, pistons, valve plate, swash plate and drive shaft — the parts that generate the pump's flow and pressure.

Wear signs and when to rebuild

A worn rotary group usually shows itself as the machine going weak once the oil heats up, slower boom and bucket, lost flow under load, or unusual noise. Scored valve and swash surfaces plus loose pistons raise internal leakage, and the pump loses pressure. While the housing is sound, fitting a new rotary group settles it without pulling the whole pump.

Choosing quality parts

Việt Trung Hải is an authorized JIC Hydraulics distributor, so every K3V180DT set from JIC arrives to the pump's own code with its source documented. Material, machining accuracy and valve-face hardness follow the K3V spec, and the group drops into the original housing without rework. Technical advice and a fast quote on request.

Frequently asked questions

Which machines use the K3V180DT rotary group?

The K3V180DT belongs to the Kawasaki K3V piston-pump series, usually fitted to ~35–45 ton excavators. Send us your pump code or machine model so we can confirm the correct rotary group before quoting.

Replace the rotary group or the whole pump?

If the pump housing and regulator are still good, changing the rotary group settles it without pulling the whole pump. When the cylinder block, valve plate and swash plate are worn or scored, a new group restores flow and pressure.

Do you have stock and how do I get a quote?

Send the K3V180DT code with a photo of the pump or your machine model. Việt Trung Hải checks stock and quotes fast; as an authorized JIC Hydraulics distributor we get K3V-series parts to the right code, and genuine Kawasaki groups are on the shelf too with a documented source.

Get a quote

Request a quote: Rotary group kit – Kawasaki K3V180DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides