Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Komatsu PC450

Komatsu · HPV

Rotary group kit – Komatsu PC450

New, correct codeOn requestPC450

Quick answer

The Komatsu PC450-7 rotary group is the rotating assembly — cylinder block, pistons, valve plate, swash plate and drive shaft — that generates flow and pressure in the HPV main pump on the roughly 45-ton class PC450-7 excavator.

Việt Trung Hải is an authorized JIC Hydraulics distributor supplying JIC groups cut to the code alongside genuine units, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Komatsu · HPV
Model code
PC450
Condition
New, correct code
Availability
On request

Komatsu PC450-7 rotary group — which pump it fits

The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that generates the pump's flow and pressure. This set fits the HPV main pump on the Komatsu PC450-7, a roughly 45-ton class excavator (PC400/PC450 range).

When to replace it

Worn pistons and a scored block or valve plate cause pressure loss, slow boom lift and a machine that bogs down under combined swing-and-crowd loads. Fast overheating and a growling drive shaft mean the group should come apart for inspection before it destroys the whole pump.

Choosing quality parts

Việt Trung Hải is an authorized JIC Hydraulics distributor. JIC PC450-7 rotary groups match the code, with properly heat-treated steel and wear faces ground to seal, so they hold pressure under heavy digging. We supply the right set for the HPV pump on the PC450-7, genuine Komatsu units included, and quote fast.

Frequently asked questions

Which pump does the Komatsu PC450-7 rotary group fit?

It fits the HPV main pump on the Komatsu PC450-7 excavator (PC400/PC450 range, roughly 45-ton class). It is the rotating group that generates flow and pressure inside the piston pump. Send your pump code and we will confirm the correct set.

When should I replace the whole rotary group instead of single parts?

When the block, pistons, valve plate and swash plate are all worn or scored, replacing the complete set holds clearances tight and pressure stable far longer than swapping a few pieces. If the pump loses pressure and overheats, replace it as a matched set.

How do I confirm my pump takes the PC450-7 group?

Read the code stamped on the HPV pump body and check it against the machine, since the PC400/PC450 family runs several versions. Send Việt Trung Hải a photo of that stamp; we confirm the right set and quote — official JIC parts to the code and genuine Komatsu units are on the shelf.

Get a quote

Request a quote: Rotary group kit – Komatsu PC450

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides