Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Kayaba PSVK2

Kayaba (KYB) · PSV

Rotary group kit – Kayaba PSVK2

New, correct codeOn requestPSVK2

Quick answer

The Kayaba PSVK2-25 rotary group is the rotating assembly inside the pump — cylinder block, pistons, valve plate and drive shaft — that generates flow and pressure for PSVK2 main pumps on mini excavators.

Việt Trung Hải supplies genuine and JIC units to the correct code, fitting a standard housing, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kayaba (KYB) · PSV
Model code
PSVK2
Condition
New, correct code
Availability
On request

Kayaba PSVK2-25 rotary group

The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — the part that actually generates flow and pressure. It carries the heaviest load and wear in the pump. The PSVK2-25 group fits Kayaba (KYB) PSVK2 main pumps used on mini excavators.

Signs it needs replacing

Weak or slow hydraulics under load, unusual noise or vibration, rapid heating, higher case-drain flow, or metal particles in the oil all point to a worn rotary group — often with scoring on the valve plate and block face and worn piston shoes.

Choosing quality parts

Tight tolerances and a well-finished running surface keep the pump holding pressure. Việt Trung Hải is an authorized JIC Hydraulics distributor supplying the PSVK2-25 group in genuine and JIC form — the JIC unit comes to the correct code, with shaft and valve plate landing where they belong in a standard Kayaba housing, so it runs as soon as it is assembled. Contact us for a fast quote.

Frequently asked questions

Which machines use the PSVK2-25 rotary group?

The PSVK2-25 group fits Kayaba (KYB) PSVK2 main pumps on mini excavators. To be sure of the exact match, send us your pump code and machine model and Việt Trung Hải will confirm the right rotary group before quoting.

Should I replace the whole rotary group or single parts?

When the block, pistons and valve plate are worn or scored together, replacing the complete rotary group restores pressure and flow more reliably and avoids opening the pump repeatedly. Việt Trung Hải advises based on your pump's actual condition.

Does a PSVK2-25 group need its running faces lapped before fitting?

No. The shoe plate and valve plate are already ground to the finish and interchange tolerance of the PSVK2-25 code, so clearances are right once the group is in a standard housing. Việt Trung Hải is an authorized JIC Hydraulics distributor and carries JIC and genuine units, with a fast quote.

Get a quote

Request a quote: Rotary group kit – Kayaba PSVK2

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides