Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Washer – Kawasaki NV111DT

Kawasaki · NV

Washer – Kawasaki NV111DT

New, correct codeOn requestNV111DT

Quick answer

The Kawasaki NV111DT washer is a spacer and sealing ring in the rotary group of Kawasaki NV-series piston pumps used on excavators, keeping the clearance and seal for the cylinder block, valve plate and shaft.

Việt Trung Hải supplies the NV111DT as genuine and as JIC Hydraulics, made to code and to interchange tolerance, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · NV
Model code
NV111DT
SKU
2021-590-1-231
Condition
New, correct code
Availability
On request

NV111DT washer in the Kawasaki rotary group

The Kawasaki NV111DT washer is a spacer and sealing ring inside the rotary group — the rotating assembly of a piston pump that generates the pump's flow and pressure. It keeps the correct clearance and seal between the rotating parts under load. It fits Kawasaki NV-series piston pumps on excavators; order by part code NV111DT.

When to replace it

A worn, hardened or cracked washer leads to internal leakage and pressure loss: weak pump, slow boom, hot oil, or knocking under load. Replace it as a set during any rotary-group overhaul so the pump does not have to be opened twice.

Choosing the right part

A wrong code or poor material deforms the washer early and can wreck the whole rotary group. Việt Trung Hải supplies the NV111DT as genuine Kawasaki and as JIC Hydraulics — we distribute JIC under authorization, and the JIC washer is cut to the same code and interchange tolerance, so it holds working clearance in the original cylinder block. Call us for a fast quote and the right part.

Frequently asked questions

Which pump does the NV111DT washer fit?

It belongs to the rotary group of Kawasaki NV-series piston pumps, part code NV111DT. Send us your pump code or machine model so Việt Trung Hải can confirm the exact part and avoid mixing up variants in the same series.

When should the rotary-group washer be replaced?

Replace it when it is worn, hardened or cracked and causes internal leakage: weak pump, slow boom, hot oil. It is best changed as a set during a rotary-group overhaul so you do not open the pump twice.

Does the JIC NV111DT washer fit the original cylinder block?

It does. JIC machines it to the NV111DT code and to interchange tolerance, so it seats in the original block and holds working clearance with no grinding or extra shimming. Việt Trung Hải is an authorized JIC Hydraulics distributor and carries genuine parts too, with a fast quote.

Get a quote

Request a quote: Washer – Kawasaki NV111DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides