Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Front drive shaft – Kawasaki NV111DT

Kawasaki · NV

Front drive shaft – Kawasaki NV111DT

New, correct codeOn requestNV111DT

Quick answer

The Kawasaki NV111DT front drive shaft is the input shaft that takes drive from the engine and passes torque through its splines into the cylinder block to turn the NV111DT main pump's rotary group on crawler excavators. It is the front shaft, distinct from the rear shaft that couples to the second pump unit.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies it genuine and JIC, to the same code, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kawasaki · NV
Model code
NV111DT
SKU
2021-590-1-30
Condition
New, correct code
Availability
On request

What the Kawasaki NV111DT front drive shaft fits

This is the front (input) drive shaft for the Kawasaki NV111DT main pump — the end that takes drive straight from the engine. Unlike the rear shaft, which couples to the second unit in a tandem pump, the front shaft carries the full input torque and passes it through its splines into the cylinder block to turn the rotary group. The NV111DT belongs to Kawasaki's NV-series axial-piston pumps used on crawler excavators.

Signs it needs replacing

Worn or chipped splines cause vibration, a knock under throttle, and falling flow. A worn seal journal weeps oil; in bad cases the shaft cracks or twists from overload or misalignment. Catch these early to avoid damage spreading to the cylinder block and swash plate.

Quality and quote

The shaft carries heavy torsional load, so steel grade, heat treatment, and spline accuracy decide its life. Việt Trung Hải supplies the NV111DT front shaft genuine and JIC; as an authorized JIC Hydraulics distributor we ship JIC shafts cut to the correct code and properly heat-treated, so the pump comes back to pressure once it is in. Call for a fast quote and help choosing front vs rear.

Frequently asked questions

How does the NV111DT front shaft differ from the rear shaft?

The front shaft is the input shaft, taking drive straight from the engine and carrying the full input torque. The rear shaft couples to the second unit in a tandem pump. They differ in position and often in splines, so order the correct one.

How do I know the NV111DT shaft needs replacing?

Vibration, a knock under throttle, and dropping flow usually point to worn or loose splines. Oil weeping at the seal journal, or in worse cases a cracked or twisted shaft, also mean it should be checked and replaced promptly.

Does Việt Trung Hải stock the NV111DT front shaft?

Yes. Việt Trung Hải supplies the Kawasaki NV111DT front drive shaft genuine and JIC — we are an authorized JIC Hydraulics distributor, and the JIC shaft is cut to the correct code, properly heat-treated and ready to fit. Contact us to confirm front or rear and get a fast quote.

Get a quote

Request a quote: Front drive shaft – Kawasaki NV111DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides