Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Washer – Kawasaki K3V140DT

Kawasaki · K3V

Washer – Kawasaki K3V140DT

New, correct codeOn requestK3V140DT

Quick answer

The Kawasaki K3V140DT washer is a shim in the piston-pump rotary group that keeps the rotating parts at the correct clearance, fitted to the main pump on ~30-ton excavators like the Komatsu PC300 and Hitachi ZX330.

Việt Trung Hải supplies genuine Kawasaki washers and JIC washers to the correct code and thickness, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · K3V
Model code
K3V140DT
SKU
2021-590-1-223
Condition
New, correct code
Availability
On request

What the K3V140DT washer fits

The washer is a shim inside the pump rotary group — the rotating cylinder block, pistons, valve plate and swash plate that generate flow and pressure. It holds the correct clearance and seating of those turning parts. The K3V140DT is the main piston pump on ~30-ton excavators such as the Komatsu PC300 and Hitachi ZX330, so the correct washer lets the rotary group reassemble to Kawasaki's original tolerances.

When to replace

A worn or deformed washer shifts assembly clearances, causing axial play and internal leakage — weak power, slow boom lift, hot oil, or knocking under load. Fit a new washer as a set when rebuilding the rotary group.

Choosing quality parts

Việt Trung Hải supplies K3V140DT washers in genuine Kawasaki and in JIC Hydraulics form — we are JIC's authorized distributor, and the JIC washer is made to the same code, material and flatness, holding clearance in the original rotary group under repeated thrust. Send your pump code or a photo of the rotary group for a fast quote.

Frequently asked questions

Which excavators use the K3V140DT washer?

The Kawasaki K3V140DT main pump runs on ~30-ton excavators, commonly the Komatsu PC300 and Hitachi ZX330. The washer sits inside the rotary group, so it applies to machines using this pump. Send your pump code and we will confirm the right part.

Replace the washer alone or the whole rotary group?

When you open the pump for a rebuild, fit a new washer with the rotating set rather than reusing a hardened old one. A fresh washer restores the correct assembly clearance so the pump runs smoother and lasts longer. We advise on matching parts.

Does the K3V140DT washer come in different thicknesses?

It does — the K3V stack needs the right thickness to bring axial clearance back to spec, so order by the code on the old part rather than by eye. Send your pump code or a photo of the rotary group and Việt Trung Hải will match it, genuine Kawasaki or JIC.

Get a quote

Request a quote: Washer – Kawasaki K3V140DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides