
Rotary group kit – Hitachi HMT045
Quick answer
The Hitachi HMT045 rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that generates the flow and pressure of the Hitachi HMT045 main pump.
Việt Trung Hải supplies genuine Hitachi parts and JIC-code groups whose valve-plate and bore tolerances follow the code, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Hitachi
- Model code
- HMT045
- SKU
- 2021-47602
- Condition
- New, correct code
- Availability
- On request
What the Hitachi HMT045 rotary group is
The HMT045 rotary group is the rotating assembly inside a piston pump: cylinder block, pistons, valve plate, swash plate and drive shaft. It is what actually generates the flow and pressure of the Hitachi HMT045 main pump. As long as the mating faces stay tight, the pump holds pressure and feeds the hydraulic system steadily.
When to replace it
The valve plate and piston-block faces wear first. As the group degrades the machine gets weak: slow boom lift, lost power under load, oil heating up fast, whine or vibration at the pump. Scored or seized pistons cut flow even at high throttle, so it is time to open the pump and change the full group rather than patch single parts.
Genuine-quality parts from VTH
As an authorized JIC Hydraulics distributor, Việt Trung Hải ships HMT045 groups in JIC code: correct material, valve-plate and bore tolerances held to the code, so the assembly reaches proper working clearance in the original housing. Genuine Hitachi parts are stocked as well. Send the code HMT045 for a fast quote.
Frequently asked questions
What is included in the HMT045 rotary group?
The cylinder block, pistons, valve plate, swash plate and drive shaft — the full rotating assembly that creates flow and pressure inside the Hitachi HMT045 pump. Việt Trung Hải supplies the complete set or individual parts as needed.
When should the whole rotary group be replaced instead of repaired?
When the machine weakens, boom lift slows, oil overheats or the pump whines and vibrates — usually from a worn valve plate and scored pistons. Replacing the full rotary group lasts far longer than patching single parts.
What is in an HMT045 rotary group?
The cylinder block, the piston-and-shoe set, valve plate, swash plate and drive shaft — the whole rotating part that makes the flow. Seals, bearings and the control unit are ordered separately by code. Việt Trung Hải lists every item in the quote, genuine or JIC.
Get a quote
Request a quote: Rotary group kit – Hitachi HMT045
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
HitachiRotary group kit – Hitachi AP5S53AP5S53On requestView · get a quote
HitachiRotary group kit – Hitachi HPK055HPK055On requestView · get a quote
Hitachi · HPVRotary group kit – Hitachi HPV091DWHPV091DWOn requestView · get a quote
Hitachi · HPVRotary group kit – Hitachi HPV091EWHPV091EWOn requestView · get a quote
Hitachi · HPVRotary group kit – Hitachi HPV102HPV102On requestView · get a quote
Hitachi · HPVRotary group kit – Hitachi HPV118HPV118On requestView · get a quote
Hitachi · HPVRotary group kit – Hitachi HPV125BHPV125BOn requestView · get a quote
Hitachi · HPVRotary group kit – Hitachi HPV135HPV135On requestView · get a quoteTechnical handbook