Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Kawasaki K5V80DT

Kawasaki · K5V

Rotary group kit – Kawasaki K5V80DT

New, correct codeOn requestK5V80DT

Quick answer

The K5V80DT rotary group is the rotating assembly inside a Kawasaki K5V piston pump used on newer ~13–14 tonne excavators — cylinder block, pistons, valve plate, swash plate and drive shaft.

Việt Trung Hải supplies the JIC K5V80DT group machined to the code and bolting into the original housing, and stocks genuine Kawasaki parts, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · K5V
Model code
K5V80DT
SKU
2021-45816
Condition
New, correct code
Availability
On request

What the K5V80DT rotary group fits

The K5V80DT rotary group is the rotating assembly inside a Kawasaki K5V piston pump — the main pump on many newer ~13–14 tonne excavators. It contains the cylinder block, pistons, valve plate, swash plate and drive shaft, and directly produces the pump's flow and pressure.

When to replace it

Typical signs of wear: the machine gets weaker as the oil heats up, flow drops under load, cylinders move slowly, or an unusual noise comes from the pump. Replacing the rotary group is usually cheaper than fitting a whole new pump.

Choosing quality parts

Việt Trung Hải is an authorized distributor of JIC Hydraulics. The JIC K5V80DT group is machined to the code — pistons and shoes on the right clearance, contact faces hardened — and bolts into the original housing to come up to full pressure. Genuine Kawasaki parts are kept in the same store. Contact us for a fast quote.

Frequently asked questions

Which machines does the K5V80DT rotary group fit?

The K5V80DT is a Kawasaki K5V piston-pump rotary group, typically fitted to newer ~13–14 tonne excavators. Send your machine model and pump number so Việt Trung Hải can confirm the exact group before ordering.

Replace the rotary group or the whole pump?

If the housing and valves are still good, fitting just a new rotary group usually restores flow and pressure at lower cost. A full pump is only needed when the housing is cracked or badly damaged.

Do you have stock and how do I get a quote?

Việt Trung Hải distributes the JIC K5V80DT rotary group and keeps genuine Kawasaki parts on hand. Call or send your pump code and machine condition to get a fast quote and check availability.

Get a quote

Request a quote: Rotary group kit – Kawasaki K5V80DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides