Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Hydromatic A4VG125

Hydromatic · A4VG

Rotary group kit – Hydromatic A4VG125

New, correct codeOn requestA4VG125

Quick answer

The Hydromatic A4VG125 rotary group is the rotating assembly that generates flow and pressure inside the pump, replacing A4VG closed-circuit variable pumps used in hydrostatic drives on rollers, pavers and wheel loaders.

Việt Trung Hải supplies the correct A4VG125 code with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Hydromatic · A4VG
Model code
A4VG125
SKU
2021-92903
Condition
New, correct code
Availability
On request

What the A4VG125 rotary group fits

The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate and drive shaft — that generates the pump's flow and pressure. This Hydromatic A4VG125 rotary group replaces A4VG-series closed-circuit variable pumps used in hydrostatic transmissions on machines such as rollers, asphalt pavers, wheel loaders and mobile cranes.

Signs of wear

A worn A4VG rotary group shows up as pressure loss, sluggish travel or weak drive, fast-heating oil and metal particles in the fluid. A scored valve plate, pitted cylinder block or seized pistons are typical failures — replace the group as a set rather than piecemeal.

Choosing quality parts

The group must match the A4VG125 code exactly, with correct material, surface hardness and precise machining. Việt Trung Hải is an authorized JIC Hydraulics distributor and supplies the Hydromatic A4VG125 rotary group with its matching components — one set, so load spreads evenly in closed-circuit duty. Fast quotes by machine model.

Frequently asked questions

Which machines use the Hydromatic A4VG125 rotary group?

It fits A4VG-series closed-circuit variable pumps used in hydrostatic transmissions on machines such as rollers, asphalt pavers, wheel loaders and mobile cranes. Việt Trung Hải confirms your exact pump and machine before quoting.

When should I replace the whole rotary group instead of single parts?

When the pump loses pressure, travels weakly, overheats or shows metal particles, the valve plate and cylinder block are usually worn together. Replacing the full group restores flow and prevents repeat failures.

Does the A4VG125 group come with the matching components?

Yes. Việt Trung Hải supplies the Hydromatic A4VG125 rotary group to code together with the parts that run with it. As an authorized JIC Hydraulics distributor we source JIC parts cut to the pump's code and tolerances, and quote fast by machine model.

Get a quote

Request a quote: Rotary group kit – Hydromatic A4VG125

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides