Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Caterpillar SBS140

Caterpillar

Rotary group kit – Caterpillar SBS140

New, correct codeOn requestSBS140

Quick answer

The Caterpillar SBS140 rotary group is the rotating assembly (cylinder block, pistons, valve plate, drive shaft) that generates flow and pressure for the SBS140 main pump on Caterpillar 320 excavators, around the 20-tonne class.

Việt Trung Hải carries SBS140 groups in JIC code, cut to the original code's tolerances so clearance is right on the first build, and genuine parts as well.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Caterpillar
Model code
SBS140
SKU
2021-16115
Condition
New, correct code
Availability
On request

What the SBS140 rotary group fits

The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — the parts that generate the pump's flow and pressure. The Caterpillar SBS140 rotary group serves the SBS140 tandem main pump on Caterpillar 320 excavators, around the 20-tonne class.

Signs it needs replacing

Slow, weak movements and lost power once the oil warms up are typical, often with pump whine and metal particles in the oil. Opened up, the valve plate and block face show scoring, and the piston slippers wear shiny — replacing the full rotary group outlasts piecemeal fixes.

Choosing quality

Block material, surface hardness and valve-plate flatness decide how long a rotary group holds pressure. Việt Trung Hải is an authorized JIC Hydraulics distributor, and the JIC-coded SBS140 group is cut to that code's fit tolerances — right working clearance on the first assembly, no lapping. Genuine Caterpillar parts are stocked as well. Contact us for a fast quote.

Frequently asked questions

Which excavator does the SBS140 rotary group fit?

The SBS140 is the tandem piston main pump on Caterpillar 320 excavators, around the 20-tonne class. Its rotary group rebuilds that pump when the cylinder block, pistons or valve plate wear out, instead of buying a whole new pump.

When should I replace the whole rotary group instead of single parts?

When the valve plate and block are both scored, pistons are worn and the oil carries metal particles, replacing the complete rotary group is more consistent and durable. Swapping single parts often leaves mating faces mismatched, so the pump weakens again quickly.

How do I tell when an SBS140 block and valve plate are past it?

Lay the valve plate on a surface plate and look for light under it, then check the running face for scoring and blue heat marks; bores that are mirror-bright or ridged at the bottom are worn. Measure piston-to-bore clearance with a dial gauge against the pump manual's limit. Send photos and Việt Trung Hải will confirm the SBS140 code.

Get a quote

Request a quote: Rotary group kit – Caterpillar SBS140

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides