Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Caterpillar SBS80

Caterpillar

Rotary group kit – Caterpillar SBS80

New, correct codeOn requestSBS80

Quick answer

The Caterpillar SBS80 rotary group is the rotating assembly inside the main piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that generates the pump's flow and pressure. It fits the SBS80 main pump on small-to-mid Caterpillar excavators around 12–13 tonnes, such as the CAT 312.

Việt Trung Hải supplies the SBS80 code either as genuine parts or as a JIC-code group with piston shoes, block and valve plate on spec.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Caterpillar
Model code
SBS80
SKU
2021-24982
Condition
New, correct code
Availability
On request

What the SBS80 rotary group fits

The Caterpillar SBS80 rotary group is the rotating assembly inside the main piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — the part that actually draws and pressurizes oil and sets the pump's flow and pressure. The SBS-family pumps are built by Kawasaki for Caterpillar; the SBS80 powers small-to-mid Caterpillar excavators around the 12–13 tonne class, typically the CAT 312.

Signs it needs replacing

As the internal parts wear, oil leaks internally and the pump can no longer hold pressure. The machine feels weak, boom and swing slow down, and speed drops under load. Expect overheating, a whining or grumbling pump, and sometimes metal particles in the oil.

Choosing quality

A rotary group works under high pressure and friction, so material, heat treatment and machining accuracy decide its life. Việt Trung Hải supplies the SBS80 group in JIC Hydraulics code — we are an authorized JIC distributor — with piston shoes, block and valve plate held to the code's tolerances, so it assembles into a used housing at the correct clearance. Genuine Caterpillar parts are on hand too. Call for the right match and a fast quote.

Frequently asked questions

Which excavator does the SBS80 rotary group fit?

The SBS80 is an SBS-family main pump built by Kawasaki for Caterpillar, used on small-to-mid Caterpillar excavators around 12–13 tonnes, typically the CAT 312. Confirm your pump code and machine model before ordering to get the right group.

Replace the whole rotary group or just some parts?

It depends on condition. A single early-worn part can be replaced individually, but when the valve plate, block and pistons are all worn, fitting the complete rotary group restores stable flow and pressure and avoids an early repeat failure.

Should the shaft seal and bearing go in with a new SBS80 group?

Change them. The seal and bearing have the same hours as the old group; leaving them in invites leaks and shaft misalignment that wears the new group early. Order the seal kit with the SBS80 group — Việt Trung Hải has JIC and genuine to the pump code.

Get a quote

Request a quote: Rotary group kit – Caterpillar SBS80

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides