Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Caterpillar CAT14G

Caterpillar

Rotary group kit – Caterpillar CAT14G

New, correct codeOn requestCAT14G

Quick answer

The Caterpillar CAT14G rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, retainer, valve plate and drive shaft — that creates flow and pressure, fitting the main hydraulic pump on the Caterpillar 14G motor grader.

Việt Trung Hải, an authorized JIC Hydraulics distributor, delivers the CAT14G group in JIC code, running at the clearance a new pump had, along with genuine parts and a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Caterpillar
Model code
CAT14G
SKU
2021-79235
Condition
New, correct code
Availability
On request

What the CAT14G rotary group fits

The Caterpillar CAT14G rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, retainer, valve plate and drive shaft — that produces the pump's flow and pressure. It fits the main hydraulic pump on the Caterpillar 14G motor grader, a large grader used for road building and levelling. Replacing the group as a set restores flow and pressure more reliably than swapping single parts.

When to replace

Weak pump, slow blade and lift response, and pressure drop under load point to a worn rotary group. Fast oil heating, unusual noise, or metal debris in the oil often follow; teardown usually shows a scored cylinder block, worn valve plate and enlarged piston clearances.

Genuine-quality parts and a quote

As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies the CAT14G rotary group in JIC code — selected steel, proper heat treatment and surfaces ground to the tolerances of that code, so the group runs at the clearance a new pump had. Genuine Caterpillar parts are stocked as well. Send code CAT14G for a fast quote.

Frequently asked questions

Which machine does the CAT14G rotary group fit?

It fits the main hydraulic pump on the Caterpillar 14G motor grader, a large grader used for road building and levelling. Send code CAT14G and photos of the pump so Việt Trung Hải can confirm the right group before quoting.

Should I replace the whole rotary group or single parts?

When the block, pistons and valve plate are worn or scored, replacing the full rotary group keeps parts matched and restores flow and pressure more reliably than single swaps. Việt Trung Hải advises based on your pump's actual condition.

Do I have to pull the pump off the machine to change a CAT14G group?

Yes. Getting at the block, pistons and valve plate means dropping the main pump, draining it and opening the rotary group on a clean bench. Working on the machine invites dust and swarf into the clearances. Việt Trung Hải ships the CAT14G group in JIC code or genuine, as you prefer.

Get a quote

Request a quote: Rotary group kit – Caterpillar CAT14G

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides