Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Daikin V38

Daikin

Rotary group kit – Daikin V38

New, correct codeOn requestV38

Quick answer

The Daikin Sundstrand V38 rotary group is the rotating assembly that generates flow and pressure in a piston pump — cylinder block, pistons, valve plate, swash plate and shaft. The V38 fits Daikin industrial piston pumps on hydraulic power units, machine tools and injection molding machines.

Việt Trung Hải sells genuine parts and V38 groups in JIC code that seat tight in the standard housing, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Daikin
Model code
V38
SKU
2021-78816
Condition
New, correct code
Availability
On request

Daikin Sundstrand V38 rotary group

The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — and it generates the pump's flow and pressure. The V38 belongs to Daikin's industrial variable-displacement piston pump line (Sundstrand technology), typically fitted on hydraulic power units, machine tools, injection molding machines and other industrial systems.

When to replace

A worn rotary group shows up as weak pressure, dropping flow, a slow or gutless machine while the motor still turns. Overheating, whining, vibration or metal particles in the oil point to scored pistons and a pitted valve plate. Left too long, it takes out the cylinder block and shaft.

Choosing quality parts

Because the group runs under high load and friction, material, hardness and surface finish decide its life. Việt Trung Hải ships V38 groups in JIC Hydraulics code — we are an authorized distributor — cut to that code's fit tolerances, so they seat tight in a standard V38 housing with nothing to adjust. Genuine Daikin parts are held too. Contact us for a fast quote.

Frequently asked questions

Which machines use the V38 rotary group?

The V38 belongs to Daikin's industrial variable-displacement piston pump line (Sundstrand technology), typically on hydraulic power units, machine tools and injection molding machines. Send your pump code and machine details and Việt Trung Hải will confirm the correct rotary group.

Replace the whole rotary group or single parts?

When the block, pistons, valve plate and swash plate are all worn, replacing the complete group restores pressure and flow more reliably than piecemeal repair. If only one part has failed, Việt Trung Hải advises the best option for your pump.

How should a fresh V38 group be run in before full load?

Fill with clean oil, prime the pump and bleed the air before starting. Run it unloaded first, then raise load in steps while watching oil temperature, pump noise and pressure. Change the filter again after that first run — leftover metal collects there. Việt Trung Hải supplies V38 groups in JIC code and genuine.

Get a quote

Request a quote: Rotary group kit – Daikin V38

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides