
Pin – Kayaba PSVD2-17
Quick answer
The PSVD2-17 rotary group is the rotating assembly that builds flow and pressure inside the Kayaba (KYB) PSVD2-series main pump, a piston pump used on mini excavators. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies it in genuine Kayaba and JIC form — same code, seating in the original pump housing. Fast quote on your pump code.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Kayaba (KYB) · PSV
- Model code
- PSVD2
- Condition
- New, correct code
- Availability
- On request
What the PSVD2-17 rotary group fits
The rotary group is the rotating core inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — the parts that build the pump's flow and pressure. This PSVD2-17 rotary group serves the Kayaba (KYB) PSVD2-series main pump used on mini excavators. When it wears, the pump loses output even if the housing and regulator are still good.
When to replace
Weak, slow lifting and swing, power loss under load, oil heating up fast, whine or knocking on throttle-up, and erratic flow all point to a worn rotary group. On teardown, expect scoring or grey burn marks on the pistons and valve plate.
Choosing quality parts
Việt Trung Hải stocks the PSVD2-17 rotary group in genuine Kayaba and in JIC Hydraulics form. We are JIC's authorized distributor: the JIC set is cut to the same code, material and surface hardness, with fitting tolerances that let the block and valve plate seat in the original pump housing — no lapping needed. Send your pump code for a fast quote.
Frequently asked questions
Which machine does the PSVD2-17 rotary group fit?
The PSVD2-17 rotary group fits the Kayaba (KYB) PSVD2-series main pump, a piston pump used on mini excavators. Send your pump code and machine model so Việt Trung Hải can confirm the exact configuration before quoting.
When should I replace the rotary group instead of repairing the pump?
When the machine is weak, oil overheats, the pump whines, and teardown shows scoring or grey burn marks on the pistons or valve plate, the rotary group is worn and best replaced as a set. Patching single parts rarely restores steady flow.
Should I fit a whole PSVD2-17 rotary group or re-machine the block?
Once the block, wear face and valve plate are scored together, lapping one part buys only a few hours before clearance opens again. A full PSVD2-17 group keeps clearance even across the rotating stack. Việt Trung Hải carries genuine Kayaba sets and JIC sets — we are JIC Hydraulics' authorized distributor — each to the correct code.
Get a quote
Request a quote: Pin – Kayaba PSVD2-17
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kayaba (KYB) · PSVBushing – Kayaba PSVD2-17PSVD2On requestView · get a quote
Kayaba (KYB) · PSVRotary group – Kayaba PSVD2-17PSVD2On requestView · get a quote
Kayaba (KYB) · PSVRotary group – Kayaba PSVD2-21PSVD2On requestView · get a quote
Kayaba (KYB) · PSVDrive shaft – Kayaba PSVD2-17PSVD2On requestView · get a quote
Kayaba (KYB) · PSVDrive shaft – Kayaba PSVD2-21PSVD2On requestView · get a quote
Kayaba (KYB) · PSVSwash plate – Kayaba PSVD2-17PSVD2On requestView · get a quote
Kayaba (KYB) · PSVShoe plate – Kayaba PSVD2-21PSVD2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSVD2-17PSVD2On requestView · get a quoteTechnical handbook