Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Komatsu PC200

Komatsu · HPV

Rotary group kit – Komatsu PC200

New, correct codeOn requestPC200

Quick answer

The Komatsu PC200-6 rotary group is the rotating assembly inside the HPV95 main pump — cylinder block, pistons, swash plate and drive shaft — producing flow and pressure for this ~20-tonne excavator.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the correct code in genuine and JIC form, fitting a standard pump as it comes, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Komatsu · HPV
Model code
PC200
Condition
New, correct code
Availability
On request

The rotary group is the rotating assembly inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that generates the pump's flow and pressure.

What the PC200-6 rotary group fits

This rotary group serves the HPV95 main pump on the Komatsu PC200-6, a roughly 20-tonne crawler excavator. As the cylinder block and pistons turn against the swash plate, oil is drawn and delivered to drive the boom, bucket, swing and travel. When the rotary group wears, the whole machine loses power.

Signs of wear

Sluggish boom lift and bucket curl, loss of force under heavy digging, an unusually hot pump and pressure drop under load. On teardown you often see a scored valve plate, pitted cylinder block, worn pistons and slippers, and metal debris in the oil.

Choosing quality

Việt Trung Hải is an authorized JIC Hydraulics distributor. The JIC group for the PC200-6 follows the HPV95 drawing — correct material, valve plate ground to the right finish and hardness — so it goes into a standard pump and makes full pressure. Genuine Komatsu units are available too. Contact us for a fast quote.

Frequently asked questions

Which pump does the PC200-6 rotary group fit?

It fits the HPV95 main pump on the Komatsu PC200-6, a roughly 20-tonne excavator. The assembly includes the cylinder block, pistons, valve plate, swash plate and drive shaft, and sets the pump's flow and pressure.

When should I replace the whole rotary group instead of single parts?

When the valve plate and cylinder block are scored, pistons and slippers are worn together, and internal leakage leaves the machine weak and hot, replace the full assembly to restore proper clearances and pressure rather than swapping single parts.

Does Việt Trung Hải stock the PC200-6 rotary group?

Yes. Việt Trung Hải is an authorized JIC Hydraulics distributor supplying the correct rotary group for the PC200-6 — the JIC set is made to the right material and tolerances, so it goes straight into a standard HPV95, and genuine units are stocked too. Send your pump code or part photos for a fast quote.

Get a quote

Request a quote: Rotary group kit – Komatsu PC200

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides