
Pin – Kawasaki M2X170
Quick answer
The Kawasaki M2X170 rotary group is the rotating assembly inside the swing motor — cylinder block, pistons, valve plate and shaft — that turns oil pressure into swing torque on ~30-ton class excavators like the Kobelco SK300/SK330.
Việt Trung Hải, JIC Hydraulics' authorized distributor, ships M2X170 groups to the exact code — genuine Kawasaki or JIC, each seating in the original motor housing — with fast quotes.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Kawasaki · M2X
- Model code
- M2X170
- SKU
- 2021-590-1-163
- Condition
- New, correct code
- Availability
- On request
What the M2X170 rotary group fits
The Kawasaki M2X170 rotary group is the rotating assembly inside the motor — cylinder block, pistons, valve plate and shaft. In the M2X family this is a swing motor: the rotary group turns oil pressure and flow into torque that drives the swing reduction gear and rotates the upper structure. The M2X170 is a large swing motor, typically found on ~30-ton class excavators such as the Kobelco SK300/SK330 and similar machines.
Signs it needs replacing
Worn rotary groups cause weak or slow swing, jerky start and stop, and swing drift on slopes from rising internal leakage. You may hear a whine, notice the motor overheating, or find metal debris in the oil.
Choosing genuine quality
Material, heat treatment and surface accuracy decide how long a rotary group lasts. Việt Trung Hải is JIC Hydraulics' authorized distributor: the JIC M2X170 rotary group is the factory JIC part, alloy steel with valve plate and swash face ground to the same fitting tolerance, so it seats in the original motor housing and holds pressure straight away. Genuine Kawasaki units are on the shelf too. Contact us for a fast quote.
Frequently asked questions
Which excavators does the M2X170 rotary group fit?
The M2X170 is a large Kawasaki swing motor, commonly used on ~30-ton class excavators such as the Kobelco SK300/SK330 and similar machines. Send us your machine year and motor serial so Việt Trung Hải can confirm the exact rotary-group configuration before quoting.
When should the M2X170 swing motor rotary group be replaced?
Replace it when swing becomes weak, slow or jerky, the upper structure drifts on slopes, the motor whines or overheats, or metal debris appears in the oil. These point to worn cylinder block, pistons, valve plate and swash surfaces inside the rotary group.
How do I tell whether my machine needs an M2X170 or another M2X size?
Read the code cast on the swing motor body and its tail suffix. The M2X170 is a large frame in the M2X family; smaller machines usually run an M2X120 or M2X150. Send a photo of the motor code and your machine year — Việt Trung Hải checks it and ships the right code, genuine Kawasaki or JIC, as JIC Hydraulics' authorized distributor.
Get a quote
Request a quote: Pin – Kawasaki M2X170
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XDrive shaft – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XShoe plate – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XRetainer plate – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XFriction lining – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XValve plate – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XBall guide – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XWasher – Kawasaki M2X170M2X170On requestView · get a quoteTechnical handbook