
Kawasaki · NV
Washer – Kawasaki NV137DT
Quick answer
The Kawasaki NV137DT is a spacer/washer in the rotary group of Kawasaki NV-series piston pumps (the NV137), setting axial clearance and preload so the pump holds flow and pressure. It's a mid-size main pump on older excavators and hydraulic cranes.
Việt Trung Hải keeps NV137DT washers from genuine and from JIC in stock, made to code so clearance comes back to spec, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Kawasaki · NV
- Model code
- NV137DT
- SKU
- 2021-590-1-232
- Condition
- New, correct code
- Availability
- On request
What the Kawasaki NV137DT washer fits
The NV137DT is a spacer/washer inside the pump rotary group — the rotating assembly (cylinder block, pistons, valve plate, swash plate, drive shaft) that produces the pump's flow and pressure. It sets axial clearance and preload so the block stays sealed against the valve plate. It belongs to Kawasaki's NV-series axial piston pumps — specifically the NV137, a mid-size member between the NV111 and NV172, a main pump on older excavators and hydraulic cranes.
When to replace
A worn, thinned or wrong-thickness washer opens up axial clearance: internal leakage, falling pressure, a machine that weakens under load, oil heating up, knocking or vibration at the pump. Inspect the whole rotary group and replace the spacer to spec.
Getting the right part
The correct NV137DT code and thickness tolerance keep the clearance right. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC rotary-group parts cut to the same code and interchange tolerance — they go into the original pump housing and bring clearance back to what a new pump had. Genuine parts are on the shelf too; contact us for a fast quote.
Frequently asked questions
Which pump does the NV137DT washer fit?
It's a spacer/washer in the rotary group of Kawasaki NV-series piston pumps, used on the NV137 — a mid-size main pump between the NV111 and NV172, common on older excavators and hydraulic cranes. Match the exact code to the rotary-group set.
How do I know the rotary-group washer is worn?
As the washer wears or loses thickness, axial clearance grows: the machine weakens, the boom lifts slowly under load, oil heats up, and you hear knocking or vibration at the pump. Open the rotary group and replace the spacer along with any worn parts.
Does Việt Trung Hải have the NV137DT washer in stock?
Yes. As an authorized JIC Hydraulics distributor, we keep NV137DT washers and rotary-group parts from JIC on the shelf alongside genuine ones. The JIC part is cut to interchange tolerance, so it runs at the right clearance in the original housing. Contact us for a fast quote.
Get a quote
Request a quote: Washer – Kawasaki NV137DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · NVRotary group kit – Kawasaki NV137DTNV137DTOn requestView · get a quote
Kawasaki · NVRear drive shaft – Kawasaki NV137DTNV137DTOn requestView · get a quote
Kawasaki · NVFront drive shaft – Kawasaki NV137DTNV137DTOn requestView · get a quote
Kawasaki · NVSwash plate – Kawasaki NV137DTNV137DTOn requestView · get a quote
Kawasaki · NVRetainer plate – Kawasaki NV137DTNV137DTOn requestView · get a quote
Kawasaki · NVValve plate – Kawasaki NV137DTNV137DTOn requestView · get a quote
Kawasaki · NVPiston – Kawasaki NV137DTNV137DTOn requestView · get a quote
Kawasaki · NVBall guide – Kawasaki NV137DTNV137DTOn requestView · get a quoteTechnical handbook