Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Washer – Kawasaki K3V63DT

Kawasaki · K3V

Washer – Kawasaki K3V63DT

New, correct codeOn requestK3V63DT

Quick answer

The K3V63DT washer is a rotary-group part in the Kawasaki K3V63DT main pump, holding the axial clearance of the rotating stack that generates flow and pressure. This pump powers ~13-ton excavators such as the Komatsu PC120 and Kobelco SK130.

Việt Trung Hải supplies JIC washers to code, as JIC Hydraulics' authorized distributor, alongside genuine Kawasaki parts, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · K3V
Model code
K3V63DT
SKU
2021-590-1-226
Condition
New, correct code
Availability
On request

What the K3V63DT washer fits

The K3V63DT washer is a spacer ring inside the pump's rotary group — the rotating stack of cylinder block, pistons, valve plate and drive shaft that generates the pump's flow and pressure. It holds the correct axial clearance so the block and valve plate seat under the right load. The part belongs to the Kawasaki K3V63DT main pump, used on ~13-ton excavators such as the Komatsu PC120 and Kobelco SK130.

When to replace

A worn, scored or deformed washer lets the rotating group develop play and lose clearance — showing up as pump noise, vibration, internal leakage and weak, slow cylinders under load. If teardown reveals a pitted washer, replace it together with the other rotary-group parts.

Choosing quality

A correct-code K3V63DT washer needs proper material, surface hardness and a flat, even finish to take repeated thrust without fast wear. Việt Trung Hải is an authorized JIC Hydraulics distributor, supplying JIC washers and K3V rotary-group parts machined to the same code, so they set the right clearance in the original stack. Genuine Kawasaki parts are stocked as well — contact us for a fast quote.

Frequently asked questions

Which excavator does the K3V63DT washer fit?

It is a part inside the Kawasaki K3V63DT main pump, used on roughly 13-ton crawler excavators such as the Komatsu PC120 and Kobelco SK130. Send us your pump code and machine model so we confirm the exact part before you order.

When should the K3V63DT rotary-group washer be replaced?

Check it when the pump grows noisy, vibrates, or the cylinders turn weak and slow under load. During teardown, a worn, scored, pitted or deformed washer should be replaced — ideally together with the other rotary-group parts to keep clearances correct.

Which code should I go by when ordering a K3V63DT washer?

Use the number stamped on the old washer together with the code cast on the pump body and the machine model, PC120 or SK130. Send that to Việt Trung Hải and we check stock and price — JIC washers to code, as JIC Hydraulics' authorized distributor, or genuine Kawasaki.

Get a quote

Request a quote: Washer – Kawasaki K3V63DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides