
Rotary group kit – Komatsu PC400
Quick answer
The Komatsu PC400-7 rotary group is the rotating core inside the main pump — cylinder block, pistons, valve plate, swash plate and shaft — that generates flow and pressure, fitting the HPV main pump on the ~40-tonne PC400-7 excavator.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC parts cut to the code and hardened to spec, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Komatsu · HPV
- Model code
- PC400
- Condition
- New, correct code
- Availability
- On request
Komatsu PC400-7 pump rotary group
The rotary group is the rotating core inside a piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that produces the pump's flow and pressure. This assembly fits the Komatsu HPV main pump on the PC400-7, a ~40-tonne class excavator. When the pump housing and valves are still sound but the core is worn, replacing the rotary group restores output without changing the whole pump.
Signs it needs replacing
Slow boom lift, weak swing and travel under load point to a worn block and pistons leaking internally. Unusual heat, whine or vibration at high engine speed usually means the valve plate and swash plate have lost their seal. If pressure will not hold on test, open and inspect.
Choosing quality parts
Because the group runs under constant pressure and friction, material, heat treatment and machining accuracy decide its life. Việt Trung Hải supplies rotary groups for the Komatsu PC400-7 in genuine and JIC form — as an authorized JIC Hydraulics distributor we ship sets cut to the code, with shoe plate and valve plate hardened to hold pressure. Send the pump code for a fast quote.
Frequently asked questions
Which pump does the Komatsu PC400-7 rotary group fit?
It fits the Komatsu HPV series main pump on the PC400-7, a ~40-tonne class excavator. This rotating core generates the pump's flow and pressure, so replacing it restores output when the pump housing and valves are still in good condition.
When should I replace the whole rotary group instead of repairing the pump?
When the machine loses power, boom lift slows and the pump runs hot without holding pressure, the block, pistons and valve plate are usually worn and leaking. If the housing and valves are sound, fitting a complete rotary group to the correct code restores output without pulling the whole pump.
Does Việt Trung Hải stock the PC400-7 rotary group?
Yes. Việt Trung Hải supplies rotary groups for the Komatsu PC400-7 in genuine and JIC form. As an authorized JIC Hydraulics distributor we ship the exact code for your machine version, ready to fit a standard housing with no rework. Contact us for technical advice and a fast quote.
Get a quote
Request a quote: Rotary group kit – Komatsu PC400
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV160HPV160On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV35HPV35On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV55HPV55On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV75HPV75On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV90HPV90On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV95HPV95On requestView · get a quoteTechnical handbook