
Rotary group kit – Kawasaki K7V63DT
Quick answer
The K7V63DT rotary group is the rotating assembly inside Kawasaki's K7V-series main pump — cylinder block, pistons, valve plate, swash plate and drive shaft — used on roughly 14-tonne class excavators.
Việt Trung Hải supplies the correct K7V63DT code in Kawasaki genuine and in JIC Hydraulics, each going into the original housing as it comes, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Kawasaki · K7V
- Model code
- K7V63DT
- SKU
- 2021-29253
- Condition
- New, correct code
- Availability
- On request
What the K7V63DT rotary group fits
The K7V63DT rotary group is the rotating assembly inside Kawasaki's K7V-series piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — that produces the pump's flow and pressure. It is the main pump on roughly 14-tonne class excavators, so a worn group drags down the whole pump.
Signs it needs replacing
Worn pistons and cylinder block cause internal leakage: weak pump, slow boom, sluggish swing or travel. A scored or scorched valve plate and swash plate, fast oil heating, whining or vibration under load, and a loose splined shaft all point to an overhaul or a new rotary group.
Choosing quality parts
This group runs under high wear, so material and machining precision set its service life. Việt Trung Hải supplies the correct K7V63DT rotary group in Kawasaki genuine and in JIC Hydraulics — block-to-valve-plate clearance and surface finish held to fitting tolerance, so either one goes into the original housing and runs. Contact VTH for a fast quote.
Frequently asked questions
Which excavator does the K7V63DT rotary group fit?
The K7V63DT is the rotary group for Kawasaki's K7V-series main pump, used on roughly 14-tonne class excavators. If unsure, send your pump code or a photo of the pump label to Việt Trung Hải so we confirm the right group before quoting.
Should I fit the whole rotary group or just some parts?
When the block, pistons, valve plate and swash plate are worn or scored together, fitting the full K7V63DT group gives better fit and life. If only a few parts are damaged, individual parts may do; VTH advises based on actual condition.
Does a JIC group need any machining to fit a K7V63DT housing?
No. The JIC Hydraulics group Việt Trung Hải distributes is made to the K7V63DT code, with clearance and surface finish held to fitting tolerance. It goes into the original housing, torques down and runs — no boring, no re-lapping.
Get a quote
Request a quote: Rotary group kit – Kawasaki K7V63DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · K7VSwash plate – Kawasaki K7V63DTK7V63DTOn requestView · get a quote
Kawasaki · K7VShoe plate – Kawasaki K7V63DTK7V63DTOn requestView · get a quote
Kawasaki · K7VRetainer plate – Kawasaki K7V63DTK7V63DTOn requestView · get a quote
Kawasaki · K7VSpring – Kawasaki K7V63DTK7V63DTOn requestView · get a quote
Kawasaki · K7VValve plate – Kawasaki K7V63DTK7V63DTOn requestView · get a quote
Kawasaki · K7VPiston – Kawasaki K7V63DTK7V63DTOn requestView · get a quote
Kawasaki · K7VBall guide – Kawasaki K7V63DTK7V63DTOn requestView · get a quote
Kawasaki · K7VCylinder block – Kawasaki K7V63DTK7V63DTOn requestView · get a quoteTechnical handbook