
Spring – Kawasaki K7V63DT
Quick answer
The Kawasaki K7V63DT spring sits in the pump rotary group, loading the cylinder block against the valve plate so the pump seals and builds pressure; it fits K7V main pumps on ~13–14 ton excavators.
Việt Trung Hải supplies genuine and JIC parts to the correct code, wound to the original dimensions for a straight fit, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Rotary group
- Brand / pump line
- Kawasaki · K7V
- Model code
- K7V63DT
- SKU
- 2021-590-1-129
- Condition
- New, correct code
- Availability
- On request
Which pump the K7V63DT spring fits
The Kawasaki K7V63DT spring sits inside the pump rotary group — the rotating assembly (cylinder block, pistons, valve plate, swash plate, drive shaft) that generates the pump's flow and pressure. It loads the cylinder block against the valve plate and holds the piston shoes on the swash plate, so the pump seals and builds pressure from start-up. It belongs to the K7V main-pump series used on ~13–14 ton excavators.
Signs it needs replacing
A weak or broken spring lets the block lift off the valve plate: slow, weak pressure build-up, internal leakage, unusual noise and cavitation. Replace the spring together with the rotary group during overhaul.
Choosing quality parts
The spring must match the design free length and rate, in fatigue-resistant, properly heat-treated steel. Việt Trung Hải carries K7V63DT springs from the pump maker and from JIC, each to the correct code and wound to the original dimensions, so the standard block takes them straight. Fast quote.
Frequently asked questions
Which excavator does the K7V63DT spring fit?
It is a rotary-group spring for the Kawasaki K7V main-pump series, model K7V63DT, typically fitted on excavators of around 13–14 tons. Send us your pump code or machine model and Việt Trung Hải will confirm the exact part and quote fast.
When should the pump rotary-group spring be replaced?
Replace it when the spring is weak, deformed or broken, so the cylinder block no longer seats firmly on the valve plate — you notice slow or weak pressure build-up, internal leakage and unusual noise. Replace it together with the rotary group during overhaul.
Do I have to strip the pump to change a K7V63DT spring?
The head cover has to come off and the rotary group has to come out to reach the spring, so most fitters check the running face, valve plate and piston shoes while it is open. Việt Trung Hải carries K7V63DT springs from the pump maker and from JIC to the correct code, plus the rest of the rotary-group parts. Send your part code for advice and a fast quote.
Get a quote
Request a quote: Spring – Kawasaki K7V63DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · K7VRotary group kit – Kawasaki K7V63DTK7V63DTOn requestView · get a quote
Kawasaki · K7VSwash plate – Kawasaki K7V63DTK7V63DTOn requestView · get a quote
Kawasaki · K7VShoe plate – Kawasaki K7V63DTK7V63DTOn requestView · get a quote
Kawasaki · K7VRetainer plate – Kawasaki K7V63DTK7V63DTOn requestView · get a quote
Kawasaki · K7VValve plate – Kawasaki K7V63DTK7V63DTOn requestView · get a quote
Kawasaki · K7VPiston – Kawasaki K7V63DTK7V63DTOn requestView · get a quote
Kawasaki · K7VBall guide – Kawasaki K7V63DTK7V63DTOn requestView · get a quote
Kawasaki · K7VCylinder block – Kawasaki K7V63DTK7V63DTOn requestView · get a quoteTechnical handbook