Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Piston – Kawasaki K7V63DT

Kawasaki · K7V

Piston – Kawasaki K7V63DT

New, correct codeOn requestK7V63DT

Quick answer

The K7V63DT piston is the reciprocating element in the cylinder block of a Kawasaki K7V main pump, used on excavators around the 13–14 tonne class, with its shoe sliding on the swash plate to draw and deliver oil.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine Kawasaki and correct-code JIC K7V63DT pistons with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Piston
Brand / pump line
Kawasaki · K7V
Model code
K7V63DT
SKU
2021-590-1-176
Condition
New, correct code
Availability
On request

What the K7V63DT piston does

The piston is the reciprocating element inside the cylinder block (rotor) of an axial-piston pump. As the block turns against the swash plate, each piston draws oil on the intake stroke and forces it out under pressure on the discharge stroke, with the piston shoe sliding on the swash-plate face. The Kawasaki K7V63DT piston belongs to the Kawasaki K7V main-pump family, fitting excavators in roughly the 13–14 tonne class.

Wear signs and choosing quality

A scored piston barrel or a loose shoe widens the clearance to the cylinder bore, so internal leakage rises: the machine goes weak, boom and arm slow when the oil is hot, and the pump runs noisy with metal debris in the oil. Fit the correct material, surface hardness and machining. Việt Trung Hải, an authorized JIC Hydraulics distributor, carries genuine Kawasaki and JIC K7V63DT pistons — JIC cuts them to code, with the shoe held to the swash-plate tolerance — and quotes fast.

Frequently asked questions

Which excavator does the K7V63DT piston fit?

It is a piston for the Kawasaki K7V main pump, used on excavators around the 13–14 tonne class. Send your pump code or machine model and Việt Trung Hải will confirm the correct set before quoting.

Should I replace one piston or the whole set?

Piston wear usually comes with block and swash-plate wear, so replacing the full set keeps clearances even and prevents fast re-failure and leakage. Việt Trung Hải advises based on the actual condition of your pump.

With the K7V63DT pump apart, how do I judge the pistons?

Look for deep scoring or burn marks on the barrel, rock each shoe to feel for play, then measure piston-to-bore clearance; a thin or loose shoe ends that piston. Việt Trung Hải has K7V63DT pistons cut by JIC to code, and genuine Kawasaki ones, ready to quote.

Get a quote

Request a quote: Piston – Kawasaki K7V63DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides