Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Washer – Kayaba MSF59P

Kayaba (KYB) · MSF

Washer – Kayaba MSF59P

New, correct codeOn requestMSF59P

Quick answer

The MSF59P washer is a spacer in the rotary group of a Kayaba (KYB) MSF-series swing motor, holding the correct axial spacing and clamping load of the rotating assembly.

Việt Trung Hải supplies MSF59P washers from genuine Kayaba and from JIC, made to code and fitting the original rotary group as they are, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kayaba (KYB) · MSF
Model code
MSF59P
Condition
New, correct code
Availability
On request

Kayaba MSF59P swing-motor washer

The MSF59P washer is a spacer in the rotary group of a Kayaba (KYB) MSF-series swing motor. It sets the correct axial spacing and clamping load between the cylinder block and valve plate so the rotating assembly runs tight and stable as the motor swings the upper structure. MSF is Kayaba's swing-motor line used across crawler excavators.

When to replace

A worn, scored or deformed washer lets the block develop axial play, causing internal leakage and pressure loss. Watch for weak or slow swing, jerky start, unusual noise or vibration, and fast heating.

Choosing quality parts

The washer must be the right thickness, flatness and material. Việt Trung Hải supplies the MSF59P from genuine Kayaba and from JIC Hydraulics, which we distribute under authorization — the JIC washer is made to code and to interchange tolerance, so clamping load comes out right in the original rotary group with no re-shimming. Contact us for a fast quote.

Frequently asked questions

Which motor does the MSF59P washer fit?

It is a spacer in the rotary group of a Kayaba (KYB) MSF-series swing motor, code MSF59P. Send your machine model and motor code and we will confirm the exact part before quoting.

When should the rotary-group washer be replaced?

When the swing motor turns weakly or slowly, jerks on start, or shows noise, vibration or fast heating from internal leakage. A worn washer lets the block develop play; replace it with the seals to restore a tight fit.

Does the JIC MSF59P washer need machining to fit an original Kayaba motor?

No. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC washer is made to the MSF59P code and interchange tolerance, so it assembles straight into the original rotary group at the right clamping load and clearance. Genuine Kayaba stock is available too — contact us for a fast quote.

Get a quote

Request a quote: Washer – Kayaba MSF59P

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides