Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Drive shaft – Kayaba MSF59P

Kayaba (KYB) · MSF

Drive shaft – Kayaba MSF59P

New, correct codeOn requestMSF59P

Quick answer

The Kayaba MSF59P drive shaft is the torque-transmitting shaft of an MSF-family swing motor on small to mid-size excavators.

Việt Trung Hải brings in the MSF59P as a JIC part and as a genuine part, machined to the exact spec so it seats in the standard motor housing, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kayaba (KYB) · MSF
Model code
MSF59P
Condition
New, correct code
Availability
On request

Kayaba MSF59P drive shaft — which unit it fits

The drive shaft transmits torque from the cylinder block out to the swing reduction gear that rotates the upperstructure. The Kayaba (KYB) MSF59P is the shaft for an MSF-family swing motor, used on small and mid-size excavators. It meshes with the cylinder block and drives the reduction gearbox that turns the machine.

When to replace

Worn, loose or twisted splines at the coupling are the clearest sign. Jerky or noisy swing, lost drive, or oil weeping past a scored seal journal all point to a failing shaft. A cracked or bent shaft must be replaced before it breaks in service.

Genuine-quality parts

The shaft carries heavy torque and reversing shock loads, so material and heat treatment decide its life. Việt Trung Hải, an authorized JIC Hydraulics distributor, brings in the MSF59P as a JIC part and as a genuine part — alloy steel, correct heat treatment, spline tolerances and concentricity held to the original figures so it seats tight and runs quiet in the standard motor housing. Contact VTH for the exact MSF59P part and a fast quote.

Frequently asked questions

Which machine does the Kayaba MSF59P shaft fit?

MSF59P is a Kayaba MSF-family swing motor used on small and mid-size excavators, and this is its drive shaft. Send your machine model and pump/motor number and Việt Trung Hải will confirm the exact part before quoting.

How do I know the drive shaft needs replacing?

Check the coupling splines — worn, loose or twisted teeth mean it is due. Jerky or noisy swing, lost drive, or oil weeping at the seal journal are also signs. Replace a cracked or bent shaft immediately.

Do the splines need lapping to the block when changing an MSF59P shaft?

No. Splines and journals on the JIC MSF59P are machined to the original tolerances, so the shaft meshes with the standard cylinder block and reduction gear and runs quiet straight away. Việt Trung Hải, an authorized JIC Hydraulics distributor, ships the exact MSF59P.

Get a quote

Request a quote: Drive shaft – Kayaba MSF59P

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides