Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Rexroth A10VD43

Uchida/Rexroth · A10V

Cylinder block – Rexroth A10VD43

New, correct codeOn requestA10VD43

Quick answer

The Rexroth-Uchida A10VD43 cylinder block is the barrel holding the piston bores inside the A10VD main pump, used on small excavators such as the Hitachi EX60 and Sumitomo SH60.

Việt Trung Hải supplies A10VD43 blocks, genuine or JIC, to the correct code with matching pistons, and quotes fast.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Uchida/Rexroth · A10V
Model code
A10VD43
Condition
New, correct code
Availability
On request

Rexroth-Uchida A10VD43 cylinder block — where it fits

The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; pistons reciprocate inside them to draw and push oil. It is the main load-bearing part inside the A10VD (Rexroth-Uchida) piston pump, a main pump used on small excavators such as the Hitachi EX60 and Sumitomo SH60.

Signs it needs replacing

Scoring, pitting or heat discoloration on the valve-plate face, plus worn piston bores, let oil slip past, so the machine loses power, lifts slowly and heats up. Odd pump noise or a clear drop in force under load calls for inspection.

Choosing quality

A good block needs hardened steel and precise bore machining to keep clearances tight. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies A10VD43 blocks in genuine and JIC with matching pistons and bushings, cut to code so the old housing needs no reaming. Contact us for a fast quote.

Frequently asked questions

Which excavators use the A10VD43 block?

The A10VD43 block fits the Rexroth-Uchida A10VD piston pump, a main pump on small excavators commonly found on machines like the Hitachi EX60 and Sumitomo SH60. Contact Việt Trung Hải to confirm your exact model and get a quote.

How do I know the cylinder block is worn?

Loss of power, slow lifting, cylinder drift and oil overheating often point to worn piston bores or a scored valve-plate face on the block. Inspect the block together with the pistons and valve plate to confirm.

Should I replace the block alone or the whole set?

The block usually wears together with the pistons and valve plate, so replacing them as a set keeps clearances tight and extends service life. Việt Trung Hải supplies the A10VD43 block with matching JIC pistons, bushings and seals.

Get a quote

Request a quote: Cylinder block – Rexroth A10VD43

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides