
Cylinder block – Komatsu HPV55
Quick answer
The Komatsu HPV55 cylinder block is the barrel holding the main pump's piston bores, used on roughly 13-tonne excavators like the Komatsu PC120. It governs the machine's hydraulic flow and pressure.
Việt Trung Hải carries the block genuine and from JIC, each to the correct code and interchange tolerance, with fast quotes.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV55
- Condition
- New, correct code
- Availability
- On request
What the HPV55 cylinder block fits
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft, where pistons reciprocate to move oil. This block belongs to the Komatsu HPV55 main pump — an axial piston pump used on roughly 13-tonne excavators such as the Komatsu PC120. It sets the flow and pressure that drive every boom, arm, bucket and travel motion.
Signs it needs replacing
A scored, pitted or worn block face against the valve plate causes internal leakage: the machine goes weak under load, slows down, the oil heats up fast and the pump turns noisy. Scored piston bores and widening clearance drop volumetric efficiency and shed metal into the oil.
Choosing quality
Material, surface hardness and machining accuracy decide service life on this high-pressure, high-wear part. Việt Trung Hải, an authorized JIC Hydraulics distributor, carries the Komatsu HPV55 block genuine and from JIC; the JIC part is cut to the HPV55 code with bores and running face on interchange tolerance, so it seats in the original housing at the right clearance. Contact us for technical help and fast pricing.
Frequently asked questions
Which excavator does the HPV55 cylinder block fit?
The HPV55 is the main pump on roughly 13-tonne excavators, typically the Komatsu PC120. The cylinder block sits inside this pump and governs flow and pressure. Việt Trung Hải matches parts to your exact machine and pump code.
How do I know the cylinder block has failed?
Common signs are a weak machine that loses power under load, slow movements, fast-heating oil and a noisy pump. On teardown, the block face against the valve plate is usually scored, pitted or worn, with metal particles in the oil.
What should I prepare before fitting a new HPV55 block?
Wash the block in clean hydraulic oil and blow it dry, check the centre spring and locating pins, and renew the shaft seal and gasket set. The JIC block is made to the HPV55 code, so there is no honing or lapping to do — flush the tank and fit new filters before you work it. Việt Trung Hải is an authorized JIC Hydraulics distributor.
Get a quote
Request a quote: Cylinder block – Komatsu HPV55
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV55HPV55On requestView · get a quote
Komatsu · HPVRear drive shaft – Komatsu HPV55HPV55On requestView · get a quote
Komatsu · HPVFront drive shaft – Komatsu HPV55HPV55On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV55HPV55On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV55 (rear)HPV55On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV55 (front)HPV55On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV55HPV55On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV55HPV55On requestView · get a quoteTechnical handbook