Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rear drive shaft 13T – Kawasaki K3V63DT

Kawasaki · K3V

Rear drive shaft 13T – Kawasaki K3V63DT

New, correct codeOn request13T

Quick answer

The 13T rear drive shaft is a 13-tooth spline shaft that carries drive to the second stage of the tandem Kawasaki K3V63DT pump — the main pump on roughly 13-ton excavators like the Komatsu PC120 and Kobelco SK130.

Việt Trung Hải, a JIC Hydraulics distributor, supplies the correct rear-position 13T shaft with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kawasaki · K3V
Model code
13T
SKU
2021-590-1-19
Condition
New, correct code
Availability
On request

Rear drive shaft 13T for the Kawasaki K3V63DT pump

This is the rear drive shaft with a 13-tooth spline (code 13T) — the shaft that carries drive through to the second stage of the tandem Kawasaki K3V63DT pump. Unlike the front shaft, which takes drive straight from the engine, the rear shaft engages through the front cylinder block and passes torque to the rear rotary group. Tooth count (13 teeth) is the key to ordering the right part.

K3V63DT is the main axial-piston pump on roughly 13-ton excavators such as the Komatsu PC120 and Kobelco SK130.

Replace when

Rounded spline teeth, a loose sloppy coupling, knocking or vibration under load, or a scored seal surface leaking oil all mean it is time for a new shaft.

Quality parts

As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies JIC shafts on code 13T for the K3V63DT rear position — load-rated steel, precision-cut splines to interchange tolerance, correct heat treatment, seating in the original housing and holding torque. Genuine Kawasaki shafts are stocked as well. Order by code and contact us for a fast quote.

Frequently asked questions

How is the 13T rear shaft different from the front shaft?

The rear shaft passes drive to the second stage of the tandem K3V63DT pump, while the front shaft takes drive directly from the engine. They differ in mounting position and engagement, so order the rear shaft specifically.

What does 13T mean?

13T is the spline tooth count — this shaft has 13 splined teeth. It is the most important selection criterion: the wrong tooth count will not engage the pump block, so confirm 13 teeth when ordering.

Which excavators use the K3V63DT pump?

K3V63DT is the main pump on roughly 13-ton excavators such as the Komatsu PC120 and Kobelco SK130. The 13T rear shaft fits this pump family. Contact Việt Trung Hải to confirm the exact part for your machine.

Get a quote

Request a quote: Rear drive shaft 13T – Kawasaki K3V63DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides