Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rear drive shaft 13T – Kawasaki K3V140DT

Kawasaki · K3V

Rear drive shaft 13T – Kawasaki K3V140DT

New, correct codeOn request13T

Quick answer

The 13T rear drive shaft is a 13-tooth spline shaft that couples to the second pump unit of the Kawasaki K3V140DT tandem main pump — fitted on ~30-ton excavators such as the Komatsu PC300 and Hitachi ZX330.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the correct 13T spec in genuine and JIC, fitting the original pump, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kawasaki · K3V
Model code
13T
SKU
2021-590-1-17
Condition
New, correct code
Availability
On request

Rear drive shaft 13T for Kawasaki K3V140DT

This is the rear drive shaft with a 13-tooth spline (13T) for the Kawasaki K3V140DT tandem main pump. Unlike the front shaft, which takes drive straight from the engine, the rear shaft passes torque through to turn the cylinder block of the second pump unit. The tooth count (13T) is the key selection criterion — the wrong spline count will not mesh. The K3V140DT is the piston main pump on ~30-ton excavators such as the Komatsu PC300 and Hitachi ZX330.

When to replace

Rounded or chipped splines, play, whining, and intermittent drive loss point to a worn shaft. A twisted shaft or cracks at the tooth root follow prolonged overload.

Choosing quality parts

The shaft carries full torque, so material, heat treatment, and spline hardness decide its life. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the K3V140DT rear shaft in the correct 13T spec — the JIC shaft holds spline pitch and case hardness on code, so it meshes and takes load in the original housing. Genuine shafts are in stock too, with a fast quote.

Frequently asked questions

How is the 13T shaft different from a 12T or 14T?

13T means the shaft has 13 spline teeth. The tooth count must match the cylinder block of the K3V140DT pump — a 12T or 14T shaft will not mesh. When ordering, confirm both the tooth count and the front or rear position.

How do I know the K3V140DT rear shaft is worn?

Rounded or loose splines usually cause whining, drive loss, and intermittent power; in bad cases the shaft twists or cracks at the tooth root. Pull the shaft and inspect the splines and surface before deciding to replace it.

Does Việt Trung Hải stock the 13T rear shaft for the K3V140DT?

Yes. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies the K3V140DT rear drive shaft in the correct 13T spec, in genuine and in JIC, each fitting the original pump as it is. Send the tooth count and machine model for a fast quote.

Get a quote

Request a quote: Rear drive shaft 13T – Kawasaki K3V140DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides